subject: Customized Newel Posts - What Kind And How To Install [print this page] A newel post is outlined as a wide square pole oftenpresent at the top or lower end of a flight of stairs. They are flipped, paneled, tapered, fluted or ornamented. There are two styles of of newel posts: turned, which are fabricated from solid wood and decorated, and boxed, which are crafted from hollow wood with a cap at the top. Primarily, they are used to support the handrails, but they are available in many patterns to give class and splendor to the stairs.
Boxed newel posts are taken into consideration when handrails are not needed. Plain box newel, flutter box newel, mission panel, recessed box panel, raised panel box newel are some of the models obtainable for boxed newel posts. A turned post is applied instead of boxed newels when space is not available. There are several custom newels and iron newels readily available.
Newel posts are offered as full newels, which the whole pole is created from a single piece of wood which includes the base; and pin newels, which are utilized when the pole and base are different.
A Post-post
technique is utilized when handrails are fitted in in the middle of the newel posts, while an over-the-post system is utilized to provide steady handrails without interruption. Boxed posts use a post-post system while pin newel posts are desirable for over the post.
Varieties of Wood To Use
The wood ideal for making newel posts should be of high quality and possess good enough length. Generally oak, maple, pine, cherry and alder are used to produce them.
Oak wood features exceptional toughness and solidness, and creates fantastic furnishings. It is also resilient against fungal attack. Cherry wood is quite heavy and strong, and when polished gives a deep, rich, red color. Maple, alder and cherry are tight-grained and are smooth to the touch when finished. Mahogany and ash are also used for their hardness and strength.
Setting Up
Technically, a newel post features 3 sections:
The top tread of first section.
Nosing for landing.
The bottom part tread of next section.
Basic Steps to Comply with for Setting Up
Measure the tread of the stairs on each landing.
Fit the post in accordance with the level needed.
For the ballisters, first conclude how many are needed. Then reduce the top at an angle similar to the angle of the stairs.
For the post, mark the place to drill the power screw on both equally its top and bottom.
Drill the power screw so that the newel post is connected to the floor. Use wood glue.
Put together the handrails by using wood glue and drilling the screws on the underside of the rails into the newel post.
Connect the ballister and the handrail. Ensurethat they are level!
Finish the stairs and check to make sure that they are solid.
Be sure to oil the newel posts after construction.
Custom Newel Posts
Custom newel posts add moresophisticat on to any staircase. Lots of people choose to have them to manifest their personal design and style or furnishings of their house. They are generally built to match the interior of the home. Custom newel posts are offered in different distinct patterns like traditional, Victorian, modern, colonial, Georgian, and federal, from classic to contemporary. They could be carved out beautifully or bedecked with jewels to bring a rich look. For custom newel posts, the wooden cap on top of the pole can be carved to characterize a flower, fruit, bird, face, or any other fancy styling.
