subject: Light Emergency Equipment Customizable To Your Requirement [print this page] Light emergency equipment used by modern emergency vehicles is extremely impressive. A wide range of new features have made their way through into the equipment, ensuring that emergency vehicles get maximum assistance out of these lights at the time of crisis. The light warning equipment offers customization in many different ways. For example, modern light bars can be configurable in terms of their length and design to suit the exact needs of the emergency vehicle. Some light bars come with staggered arrangement of strobe light heads for maximum visibility in every direction. The SAE, Class 1 and California Title XIII certified emergency lights are reliable, especially adhering to all the safety regulations.
In spite of the current draw being less than 5 Amperes in most of the modern light emergency equipment, the circuits are protected from short circuiting and voltage spike issues. There is security against reverse polarity issues as well. The light warning equipment from top manufacturers, with heavy duty professional warranty come with LEDs rated to provide an extended lifetime, sometimes in excess of 50,000 hours. Built in traffic advisors and strobes capable of operating in steady burn and flash lighting modes provide an added advantage to the emergency vehicles which need high intensity lighting in some cases and lighting with high attention grabbing quotient in some cases. Besides, high flash rates can enhance the visibility of the warning signal from the lights to a far greater extent.
The light emergency equipment usually comes with white LEDs combined with clear or colored outer and inner lenses which can provide some exciting options. Light warning equipment can sometimes come with dual colored LEDs too in multiple modules, so that the flashing becomes even more effective. The kit includes 15 feet cables, passenger and driver side cable exits, the end cap lenses and shielded power cables. The size of the emergency lights varies across a wide spectrum. There are 4 inch strobe beacons, grille lights and lightweight visor lights which are small in size. There are also massive light bars with more than a dozen LED modules and additional light heads for all round visibility.
Linear LED modules with split array arrangements can provide high intensity lighting. It is also possible to build the light emergency equipment with different color combinations customized to your need. In some cases it is possible to insert a split color module or add an additional mono-colored LED module which is different from the rest. The light warning equipment of high class usually is seen with extruded aluminum and polycarbonate for resilience to tough handling, moisture resistance, vibration resistance and efficient heat dissipation in spite of prolonged hours. There are light bars that can provide independent control of the lower as well as upper levels when multiple rows of LEDs are present. The combination can be tinkered with by using different colors of LEDs. Custom lengths are also provided for specific law enforcement vehicles which need to send across a reliable warning signal.
