subject: Ball Mill Is An Efficient Machine For Powder Grinding [print this page] Ball mills are sized from 2 t/h to 30 t/h for wet grinding and from 0.5 t/h to 30 t/h for dry grinding. They have been designed in standard sizes of the final products between 0.074 mm and 0.4 mm in diameter. So, ball mills are suitable for general mining applications such as ore dressing of ferrous metal and non-ferrous metal, quarry applications, glass ceramics, etc.
The Ball Mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on.
The hollow axis adopts the cast steel and the lining can replace, the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scaleboard. This machine run steadily and works reliably.
The ball mill is widely used in powder-making production line including cement, new-type building material, silicate, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc.
Ball mills have two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different extracting way of mine. Ball mill is widely used in cement industry, mining industry, building material, chemical industry etc.
Working Principle of Ball mill:
This ball mill is horizontal type and tubular running device, has two warehouses. This machine is grid type and its outside runs along gear. The material enters spirally and evenly the first warehouse of the milling machine along the input material hollow axis by input material device. In this warehouse , there is a ladder scale board or ripple scale board, and different specification steel balls are installed on the scale board, when the barrel body rotates and then produces centrifugal force ,at this time , the steel ball is carried to some height and falls to make the material grinding and striking. After grinded coarsely in the first warehouse, the material then enters into the second warehouse for regrinding with the steel ball and scale board. In the end, the powder is discharged by output material board and the end products are completed.
