subject: The Differences Between Coarse Crush And Fine Crush [print this page] Henan hongxing Heavy Industries specializing in the production of crushing and screening equipment, crushing and screening equipment for the aggregate productionproduced by the customer consistent high praise. Sand and gravel production line isdefined according to the type of discharge, the production of finished stone and sand, also known as aggregates production line, which is equivalent to a combination of stone production line and sand production line.
the crusher is sometimes rough broken during the eccentric crusher with a fixed axis. Such crusher eccentric sleeve is set in a fixed axis and supports the thrust bearing. Eccentric bushings in all of its high degree of fixed eccentricity. Activities cone by the eccentric bushing eccentric shaft driven by bevel gear rotation. Below for your crusher coarse crushing and fine crushing the difference
Crusher with oil pump lubrication, pump oil through a special oil groove of the fixed shaft and eccentric shaft sleeve into each bushing. The broken and crushing Cone crusher function is guaranteed to have a higher cycle coarse crushing cone crusher crushing than this is due to the tilt hammer crusher is relatively slow, swinging the number the morereason. Ore crushing space is squeezed, and the broken space the lower part of the so-called parallel region to be broken at least once.
The broken and crushing the cone crusher is based on its use can be made into two types: standard broken cone crusher and the short head type crushing cone crusher. The difference in principle between these two forms lies in the form of broken cavity shape and activity liner with fixed liner.
