subject: How To Hook Up A Computer Projector? [print this page] Projector has the capacity to cater to the large mass by its gigantic representation of images. However like any other imaging device, projector also seeks for an input. In the following set of instructions we will see how to hook up a computer projector.
Need to build up on physical connectivity:
Projectors can easily get along computers if we have the right kind of physical connection and settings made. The most important aspect of connecting the projector is to ensure there is absolutely no damage made to any pieces of hardware. The best practice to avoid any kind of damage is by turning off both the projector and the computer while making the physical connection. Projectors and monitors are most of the time alike with both embedded with VGA input. After connecting the VGA cable to the rear end of the computer and to the projector, turn on the projector and wait for a while. Following which turn the projector "on".
Pair up computer with the projector:
After the projector has turned on completely, it must come up with a blank output, it is time to turn the computer on. After the system has firmly boot up, the projector must come up with desired display. However there might be instances when the projector will not be able to identify the signals. Until the devices identify each other, communication cannot be established. So restart your computer and connect the monitor back to the rear of the system. Driver being one of the most important piece of software to offer communication between hardware, it becomes extremely important to install the projector related driver. After you have installed the drivers from either the projector CD or from the projector manufacturer"s website, you must follow the same process of pairing up the projector with the computer. The projector must come up with the image and comprehend with the computer.
Configure the settings for projector:
Many a times, users seek for both the devices work in alliance, in such a situation it is important to check whether the video card supports dual set up or not. If it does not then you might have to fetch in new video card or else will have to configure the dual output settings. If you wish to use monitor and projector one after another, by just connecting the monitor and then projector alternatively will solve the purpose. Even after following the above steps religiously, you find any difficulty; do need to contact a computer repairs and maintenanceengineer.
Things to Remember
Projectors have always been associated with fragile parts and therefore they are recommended to be kept in a stable and flat surface so that it causes less disruption while displaying images out of it. It is important to have the projector turned on before you turn on the computer. It is equally significant to give time to the projector to boot up. In situations of no drivers for projectors, one could use manufactures" website as the last resort. By entering the model number of the projector, it is possible to install the drivers.
