subject: 5 Effective Tips On Constructing A Do-it-yourself Sunroom [print this page] Constructing your very own do-it-yourself sunroom is simpler than you might think, especially if you have had some experience before. You will need to allocate space, draft a rough plan, decide on materials, build in phases, as well as jazz up the interior.
A sunroom is certainly a nice place for you to relax with a newspaper and a cup of coffee in the morning, or rest after a long day with a cool glass of red or white wine and close friends. You can build your own sun parlor with the right preparation and some help.
Allocate space
The first step in building your own sun parlor is obviously allocating some space in your property to accommodate this new expansion. Estimate the dimensions of your sunroom and mark it off. Make sure that you are accurate in your measurements, and don't leave anything out during your assessment and consideration.
Expert sunroom builders will tell you that your sunroom must face the right direction so that you can get just the right amount of sunlight each day. You could need some help figuring out this position, so at this phase, you might need to consult a contractor to get some valuable insight.
Make a rough plan
Once you have an idea of the general dimensions of your sun parlor, it's time to sit down and make a plan of the room. Utilizing the determined dimensions of length, height and width, you can now choose where to put your doors and windows. Since you will want as much sunshine as possible, the more windows you have, the better. Once again, the placement of windows will greatly influence how much daylight you get each day.
Decide on materials
Apart from a firm foundation, the materials utilized in the construction of your sunroom are equally important. Since you'll have a significant number of windows, invest in high-quality insulated glass. This will keep the coldness out on cold mornings without sparing the amount of daylight that filters through. Besides that, you have to decide on the core construction materials. Decide whether you'd like brick, stone or wooden wall structures as your main exterior. You must opt for a material that will match the rest of your home in order to attain balance and homegeneity.
Construct in phases
You can not construct a sun parlor in a day thus take your time with each phase of the construction to obtain the best quality in each step. For a better foundation, begin with a concrete foundation and build up from there. As soon as you are satisfied with the foundation, start constructing the walls, paying close attention to leaving some space for the windows and doors. Finally, provide sufficient space for plumbing and electrical wires since these will be put in once you are done with the main body of the sunroom. Roofing your sun parlor will likely be the last step once all the electrical power outlets and windows are completely installed.
Decorate the interior
Once you've got the structure of your sunroom complete, you're now ready to jazz up the interior of the room. Choose cozy furnishings and tastefully arranged decorative pieces. You could also place a potted plant or two in your sunroom to help brighten up the room. The room should be cozy and inviting, a place where people can come in, unwind and forget the worries of the day.
The most essential element to include into your sunroom is your personal touch. Since this will be the room where you and your close friends and family gather after a hard day's work, try to make this room reflect the personalities and preferences of the entire family.sunroom is undoubtedly designating some space in your home to accommodate this new addition. Measure the dimensions of your sunroom and mark it off. Ensure that you are accurate in your measurements, and don't leave anything out during your assessment and consideration.
Expert sunroom builders will tell you that your sun parlor must face the right direction so that you can get just the right amount of sun each day. You might possibly need some assistance finding out this position, so at this step, you may need to consult a contractor to get some useful insight.
