subject: Corrosion Inhibited Propylene Glycol Based Coolant Antifreeze (low Toxic) [print this page] Corrosion inhibited propylene glycol based coolant antifreeze (low toxic), used as an industrial coolant, antifreeze heat transfer agent. The inhibitor package is designed to protect brass, copper, solder, cast iron, steel, aluminum and other metals commonly found in the industrial cooling and heating systems.
The effectiveness of corrosion inhibited propylene glycol based coolant antifreeze (low toxic) in preventing corrosion has been proven in extensive laboratory and in actual service tests. Using corrosion inhibited propylene glycol based coolant antifreeze (low toxic) for heat transfer applications instead of uninhibited propylene glycol reduces maintenance costs and improves heat transfer efficiency.
Propylene glycol based coolant antifreeze are non-toxic and food grade.
Outperforms dowfrost and ambitrol range of inhibited propylene glycol based coolants.
The storage temperature of corrosion inhibited propylene glycol based coolant antifreeze agent is not critical, in that there will be no hazardous conditions created by storage of this product at any ambiance temperature likely to be encountered. Corrosion inhibited propylene glycol based coolant antifreeze agent should be noted however for product quality reasons the storage temperature should not go above 40oc. At below freezing temperatures corrosion inhibited propylene glycol based coolant antifreeze viscosity might become too high for transfer from the storage containers with the pumps available. corrosion inhibited propylene glycol based coolant antifreeze agent is a stable chemical and is not expected to deteriorate significantly with time provided it is stored as indicated. As a good industrial practice, it is however recommended that corrosion inhibited propylene glycol based coolant antifreeze agent should not be stored for periods longer than 6 months. bulk tanks should be of hdpe, non-rusted stainless steel or mild steel. Hoses should be of polypropylene or ss. drums should be stored in dry conditions away from sources of direct heat, preferable in the unopened original containers. Opened drums must be re-closed tightly immediately after drawing out material.
Engine Coolant or Radiator Coolant is based on Inhibited Ethylene or Propylene Glycol solution or concentrate. These are used by all vehicles for heat transfer. Antifreeze Coolant should be efficient in transferring the heat as well as preventing scale and corrosion of the radiator and the engine cooling system.
This coolant can also function as antifreeze in low temperature brine chilling plant application (also known as Brine)
Radiator Coolant helps the engine to give optimum performance.
Chemtex range of Industrial Coolants replaces all products of DOW FROST (Heat Transfer Fluid based on Propylene Glycol), DOW THERM (Heat Transfer Fluid based on Ethylene Glycol), NORKOOL and AMBITROL range, more economically and effectively.
