subject: The 4 Aspect Pertaining To Application For Motor Turbo [print this page] Garrett turbocharger tends to make utilization of the exhaust released in the motor to generate the turbo. The operating temperature of turbo end would exceed 600 degrees. The rotating speed of turbocharger is rather high. So as to ensure the normal operating of turbocharger, we should really follow the methods below:1 When launching the motor, it should not stage on accelerator pad in rush. Rather, it ought to generate with idle pace for 3 minutes. That is to heat within the temperature of oil and enhance the liquid flowing feature, after which the motor turbocharger can aquire full lubrication to pace increase the rotating pace of motor for car driving. It is quite important for winter season. We've to warmth up the automobile more than 5 minutes.2 If the motor has run in high pace for some time, it should be prohibited to stop the fire all of a sudden. The cause is the fact that: throughout the operating of engine, there would be partial oil to provide for the roller lubrication and coolness of turbocharger. When the engine is suddenly shut down when operating, the sharp decrease around the oil strain would come back again to zero. And also the oil lubrication could be stopped. At this time, partial temperature would arrive back again to the center. The heat in the supportive gearing could not be quickly brought away. Inside this kind of case, it would trigger the braking caught in between turbocharger and gearing cover, after which the gearing and axis would get damaged. Meanwhile, the engine turbocharger is not suitable for idle operating. Generally, the idle running should be stored inside ten minutes.3 It really is important to select oil. According to the power by motor turbocharger, the particular high quality and quantity within the burning house would get sharply elevated. The motor structure would be tighter and more wise. The greater strain proportion would raise the working force of engine. The precision requirement of mechanical production and installation technologies would get stricter. Simultaneously, the inside gadgets of engine turbocharger will need to endure greater temperature and large collision. Consequently, when choosing the oil for engine turbocharger, we have to take its unique function into mind. The utility oil really should be around sound function to defend against friction and substantial temperature.4 The engine oil and filter should really be thoroughly clean from the turbo repair kits to prevent the entry of foreign make a difference. The gap between rolling axis and cover of motor turbocharger is quite small. If the lubrication power decreases, it would cause the early scrapping of turbocharger.
