subject: A Few Helpful Suggestions Maintaining Your Home Wind Mills [print this page] When you buy your residential wind turbines they can be productive for up to 20 years. It's estimated that the cost of maintenance for a wind turbine is as little as one cent per kilowatt, and it's because of the fact that most of the wind turbines have sleek and stable designs. However, you still need to maintain the machine from time to time so that it is safe to use and runs efficiently throughout its lifetime.
Several parts of the wind turbine are more vulnerable than the others, and therefore you require to perform regular maintenance on those parts. The mills are specially more subjected to the possibility of wear and tear as they are moving all the time; you should oil and grease them often so they are able run smoothly. Other than the turbines, the blades and tower must be regularly maintained also since they're exposed to the possibility of loose bolts and corrosion. You should also test on the devices electrical connections and see whether there are any problems. If there're any, hiring an electrician can help you correct the problem.
It's very significant to check the safety of your electrical connection, i.e. From your residential wind turbines into your home. Usually you can find on-grid systems being installed to detect outage, and when this takes place the electricity supply will be automatically shut down. This protects you from electrocuted since the power is already blocked.
Whenever you buy wooden wind turbines, you should know that the mills are more prone to corrosion. It is best if you replace the wooden mills with fiberglass mills since they're more tough and don't need regular repairing. Often you may even see that your blades do crack despite of their durability, and this condition needs maintenance too. There're several aspects which can cause your turbines to crack, like severe changes in climate and the length of time the machine has been used.
If you've an older version of wind mills, you have to maintain it more often during winter. This is because the turbines may collect ice and you need to de-ice them to allow faster rotation.
