subject: The Four Aspect Regarding Software For Engine Turbochargers [print this page] Garrett turbocharger makes utilization of the exhaust launched in the engine to generate the turbo. The operating temperature of turbo end would exceed 600 degrees. The rotating pace of turbocharger is fairly substantial. So as to ensure the normal working of turbocharger, we might keep to the methods below:1 When launching the engine, it ought not to stage on accelerator pad in rush. Rather, it must drive with idle pace for 3 minutes. That's to heat the temperature of oil and improve the liquid flowing function, after which the engine turbocharger could get complete lubrication to speed the rotating pace of engine for automobile driving. It truly is fairly important for winter. We've to heat the automobile more than 5 minutes.2 When the motor has run in high pace for some time, it should certainly be prohibited to stop the hearth suddenly. The reason is that: during the running of motor, there would be partial oil to provide for the roller lubrication and coolness of turbocharger. When the motor is suddenly shut down when running, the sharp reduce around the oil pressure would arrive back again to zero. And the oil lubrication would be stopped. At this time, partial temperature would arrive back towards the middle. The heat within the supportive gearing could not be rapidly brought absent. Inside such situation, it would cause the braking caught between turbocharger and gearing cover, and then the gearing and axis would get damaged. Meanwhile, the engine turbocharger is not suitable for idle running. Generally, the idle running should be stored inside 10 minutes.3 It's essential to select oil. Based on the power by engine turbocharger, the environment quality and quantity within the burning house would get sharply elevated. The engine structure would be tighter and more sensible. The higher strain proportion would raise on the operating power of engine. The precision need of mechanical production and installation technologies would get stricter. Simultaneously, the inside devices of motor turbocharger must endure higher temperature and giant collision. Consequently, when choosing the oil for motor turbocharger, we've to take its unique function under consideration. The utility oil might be around audio feature to defend against friction and high temperature.4 The motor oil and filter must be thoroughly clean from the turbo repair kits to stop the entry of foreign make a difference. The gap between rolling axis and cover of motor turbocharger is quite small. When the lubrication force decreases, it would trigger the early scrapping of turbocharger.
