subject: How To Maintain Turbocharger For A Car? [print this page] In the times to seek efficiency, the turbocharger has become the symbol of high efficiency and science. But the turbocharger would create explosive pressure and average temperature when lifting up the output power. Therefore, the maintenance of turbocharger car may set higher requirement. Here we'd like to offer some tips for turbocharger maintenance.
1 Choose full-composed engine oil
Recently, turbocharger problem may mainly result from the oil sealing damage between turbocharger and inlet. The main reason of damaged oil sealing is the on long period of oil complementary or the utility of poor oil. The floating turbocharger rolling axis would be lack of lubrication and hard to spread heat. Then, the oil sealing would get damaged to cause leakage. Common turbocharger would get started with the rolling speed of 3500r. The faster speed of engine would ask for strong ability of resistant shearing function. It is pointed out by experts that we have to choose high-level fully composed oil.
2 In-time clean on turbocharger
The biggest feature of turbocharger is magnificent power. It depends on precision design and manufacturing crafts. At the same time, the strict working environment of turbocharger is also doomed. Therefore, turbocharger is with extremely high standard on cleanness. Any type of foreign matter or particle would bring friction damage to turbocharger. What's more, the air filtering machine should be cleaned and replaced from time to time. The dust should be prevented in the high-speed rotating wheel. Since the gap between turbocharger rotating axis and roller cover is extremely small, the turbocharger would get earlier exhaust due to the deteriorated lubrication oil quality. Also, it is suggested by experts that car owner should prevent long-term utility of turbocharger if the surrounding air condition is poor or the air dust thickness is quite high.
3 Sudden engine cease should be prevented for soft starting
The working temperature of diesel turbocharger would reach 900 to 1000 degrees Celsius. Under the working condition with full burden, the rotating speed can reach the speed of 180 to 200 thousand per minute. Its working condition is extremely harsh. When driving the car with turbocharger design, we should be caution for soft starting. Since the turbocharger relies on mechanical oil to get cooled down, if the lubrication oil quality is not good for soft starting, the turbocharger friction would be great under high-speed rotating. The correct way is to drive the car with idle speed for three minutes to get sound feature of lubrication. During the high-speed drive, the sudden engine cease should be prohibited.
