subject: Battery Cell Activation Correction Method [print this page] Now the battery in the factory have already been activated, but sometimes need to re-activate a variety of reasons:
Cell activation correction method:
When the SAMSUNG NT-RV415 Battery capacity decline and was feeling a lot less time when using the battery calibration, (Tips, ECPOW laptop batteries are smart in the factory are automatically activated, generally do not have to re-activate).
1. Press F2 to enter BIOS
2. Select the menu into the POWER
3. Select START BATTERY CALIBRATION after the prompt, then plug the power adapter to facilitate the machine to charge the battery.
4. When the following prompt screen appears, remove the power adapter. And wait for the machine automatically shut down to complete discharge.
PLEASE REMOVE AC ADAPTER (This is the prompt. It means that you have to remove the power adapter)
5. Connect the adapter to be turned off, charging to the charging indicator light is off, the battery calibration is completed (takes about 4-5 hours)
The lithium-ion SAMSUNG NT-RV515 Battery in the repeated use, the discharge curve may change, if the chip has been no opportunity to once again read out a complete discharge curve, the calculated power is not accurate. So we need to calibrate the battery charge-discharge depth of the chip.
In general, the battery seams are glued together by adhesive, so we can easily see the location of adhesion, but the interface is basically the location, there is no powerful tool, and is basically not open. Decomposed, we can see that the volume is more than 95% of batteries, plus a piece of circuit board
The battery circuit board is mainly shell + + batteries, it seems the most important part is the batteries, it is not true, the most important part is the circuit, because the process of using a battery itself is recorded in the circuit board. Maintenance of a battery, if you simply replace the batteries, it is useless, because on the battery itself is good or bad, have always been recorded. So if we have to find out if the battery maintenance, you will find a word to unlock, the lock is actually recorded in the board information about the battery replacement, for example, number of charge cycles, and the use of time to re-set, plus all the wires core of the match, it will achieve the same with the new battery duration.
I bought a new SAMSUNG NP-X280 Battery installed on your computer impulse, or ten hours showed 0%, I heard that a new battery to activate the laptop battery does how to activate?
The following conditions need to activate the battery deal:
1. Has just opened a new battery.
2. For a long time do not use the battery, the battery status away from the computer at the store, now re-enable the battery.
3. A long time do not use the battery from the notebook or laptop stand out of storage (more than two or three months), now re-enable the battery.
To activate the battery processing method:
Activation of chemicals within the battery to maximize battery performance, need to repeat the charge and discharge the battery (fully charged and then fully discharge) three times. The so-called fully charge and discharge is: normal battery power so the ASUS Eee PC 1025 Battery power to 3% (preferably once depleted, can be divided into several times to power, but not interval too long), and then must immediately shut down the battery charge twelve hours.
More laptop battery info at: http://www.lovebattery.net
