subject: Reason Of Popularity Of Cellular Phone Jammer System [print this page] Failure to look for the failure to narrow the scope to get first, also to determine the kind of fault, both a hardware failure (including memory itself is damaged) It is deemed an internal software problem. If a hardware failure, but ensure its non-welded in adverse circumstances, and should be replaced. In the event the software fails, it has to utilize the instrument to re-write it maintenance software. The jammer selection of cell phone jamming can be simply measured.
Maintenance practices found which the bulk of mobile phone software within the chip, and a lot from the chip in data loss or error. Cellphone software failure occurs, the two ways to avoid disassemble and disassemble processing, the characteristics of two ways described below. Free approach to disassemble the software with specialized maintenance equipment, while using the computer, don't disassemble in case of failure from the cellular telephone software for processing. Such as current full-featured digital cellphone better software fault repair device, including locking handles, displays "Contact Supplier","bad cellular phone, please send it back","security code", "software part" will not are aware of the card , not network, black, low-battery alarm failure. The modern dormitory building of cell phone jammer company can solve the residence problem of all employees.
Approach using the software fault-free disassemble easily, usually do not disassemble, tend not to change the cell phone's serial number IMEI, the cell phone's internal circuitry just isn't affected. Free disassemble approach is not very versatile, when the cellular phone can not boot or come upon another process not disassemble the brand-free mobile phone; encounter the cell phone's software failure or font chip blowing with heat gun, using universal programmer (for example LABTOOL-48), rewritten with computer (PC mobile phone upfront to get there all data), which uses computer data overwrite existing common fault data in the cellphone, if no-fault Mobile data is the same model, and then expand his or her, must find someone that has a cellphone models, to take out the chip, one while using the programmer to learn out your data can be stored in the computer. The cellphone jammer company encourages every employee to get familiar with the meet.
Disassemble the instrument isn't going to apply to software maintenance and version from the chip combined models (as Motorola V988, V60, etc.) no matter or disassemble the software maintenance-free instrument maintenance device with disassemble the software, write data prior to going to discover the cellular telephone version, set up same sort of cell phone, because of its production date and different origin, its version number can be different, so, inside maintenance cellular phone through the handling on the software must check its version, otherwise it will eventually cause no such power or a number of the functions fail. The purchaser will look at the dining hall of cell phone jammer company.Okay,you can know the dimensions and result now. This article are derived from the wholesale electronics shop-http://www.chinaewindow.net,please indicate the source if retweet,thanks very much!
