Board logo

subject: Types Of Chicago Pool Resurfacing [print this page]


After ten to twenty years of installation, your swimming pool surface may look worn out due to chipping and discoloration. This calls for resurfacing, referring to the improvement of the pools appearance. Depending on the type, some can simply have Do-It-Yourself (DIY) resurfacing. If you are a cautious type of homeowner, you can always hire a contractor.

Before hiring a contractor, consider your budget for pool resurfacing. As of 2011, pool resurfacing can cost $8,000 to $15,000. You also have to consider the type of resurfacing you need according to the type of pool you have. There are four types of pool resurfacing offered by Chicago contractors, namely: pebble, quartz, plaster, and tile.

Your pool can have its natural, rustic look by using pebble during resurfacing. A pebble finish consists of a mixture of smooth-edged tumbled rock and plaster that looks good on pools with boulders, waterfalls, and other water features. You can also request your contractor to apply color on the pebble finish to match with your house. Pebble resurfacing can last up to 20 years with proper maintenance.

More elegant than pebble, quartz can give your pool an aesthetically pleasing appearance. Quartz finishes are stain resistant and very easy to customize. It requires minimum maintenance and can last up to 20 years, just like pebble. Pool quartz resurfacing, however, is more expensive than pool plaster resurfacing Chicago can offer.

Because most pools in Chicago have plaster surface, it is highly recommended to use pool plaster resurfacing Chicago contractors can offer. One of the reasons why plaster is appealing to most homeowners is affordability. Compared to pebble, it can also be painted with different colors to match with the landscape design in the backyard. A typical plaster resurfacing may take up to four weeks to complete and may last up to 10 years with regular maintenance.

You can also give another distinctive look to your pool by using tile. It is the most expensive type of pool resurfacing in Chicago, probably due to expensive materials such as glass and ceramic. If you are on a tight budget and you cannot resurface your entire pool with tiles, you can always choose to use tile borders which can be an affordable pool service Chicago can offer.

by: Cathy Newman




welcome to loan (http://www.yloan.com/) Powered by Discuz! 5.5.0