subject: How To Clean Vacuum Filter [print this page] If you want to be sure that your vacuum cleaner works efficiently, you need to maintain it in a good condition. Although it is intended to cope with cleaning tasks, it also has components which need cleaning. Vacuum filter is a very important part of any vacuum cleaner. That is why you should know how to clean it the right way.
The first step is to check the user's manual. Carpet cleaners Melbourne recommend you do that if you want to find the right instructions how to open the vacuum cleaner and remove the filter without causing damages.
No matter if your vacuum cleaner is bagless or not, it has a filter for sure. You need to remove it and clean it. The bigger vacuum cleaner you have, the bigger its filter is. You should keep a plastic bag or bucket available when you open the machine. That will prevent you from spreading some dust around.
When you have found the exact position of the filter, you can carefully remove it. Lift it gently and move it over the bucket you have prepared. Then, take it outside along with the bucket to avoid dust lingering in your home.
The next step is to clean the filter. Get a brush with soft bristles and gently brush off the dust. That will be enough to get rid of all debris without harming the filter.
Don't rinse the filter with water. That could make it completely useless. Most of the filters cannot be washed, but if yours can, make sure to follow the instructions provided in the user's manual.
When the filter is clean, you need to put it back to its place. Before you do that, empty the vacuum bag or the dust container. Brush inside the body of the vacuum cleaner. Then, you can put the filter back. After that, make sure to close the shutter correctly.
Cleaning the filter should be done regularly. As you can see, it is a very easy task. Carpet cleaning Melbourne advise to clean it 2 or 3 times in a month. That will keep your vacuum cleaner well-maintained.
