subject: Eight Simple Steps In Packing Vinyl Record Albums [print this page] Packing your vinyl records, whether for shipping or to be stored as collection, shouldn't be taken lightly. Simply because, when packing isn't performed the proper way, your vinyl records might get ruined. Pressure, dampness, temperature, and light can all cause your own vinyl records to reduce their worth and become unplayable. Common paper and vinyl record sleeves could only present little security for your record albums. As well as utilizing additional support cushioning, you need to know how to bunch your albums the right way, to keep them shielded from all environmental aspects. Read this article to know the steps in packing vinyl record albums.
Prepare Materials
The very first thing you should do to begin packing your vinyl record albums would be to prepare the materials that you will need. These are the following: a turn table, a carbon bristle brush, acid-free sleeves, corrugated card board squares or foam pads, bubble wrap, packaging tape, record mailing boxes, newspaper, and also permanent marker.
Take Records From Their Old Sleeves
Get the vinyl record out of the original sleeve and put in on the turntable. If the paper inner sleeve is simply a regular form of paper with no writing, lyric, or information regarding the album, throw it away. Any kind of shrink wrap outside the cover needs to be taken away and thrown away, too.
Clean the Record Albums
Have the turntable turned on its minimum speed, and then slowly lower the brush with the carbon fibre bristles down into the record's grooves. Have each side of the album cleansed in this manner without moving the brush across the groove's directions.
Place Records in Brand New Sleeves
Place the newly cleansed record into a new acid-free sleeve. If you wish to keep the old sleeve, stack this on top of the brand new one.
Stack Record Albums On top of One Another
Stack your own record albums as well as squares of corrugated card board or tough foam pads between each album, to keep them from rubbing against one another, as well as provide them with stability.
Wrap Stacks of Records
By using the bubble wrap, wrap every side of the stacks of records. But be sure that no adhesive, from the adhesive tape you utilize to secure the bubble wrap in place, gets in contact with the surface area of the records.
Place Stacks of Records inside Box
Place the stacks of records within the cardboard box, and refill vacant areas across the records with crumpled magazines, to prevent the records from transferring around while being shipped or stored.
Tape and also Label Box
Tape the box on all of its seams and also sides by using the packaging tape. This can enhance the box and also secure the record albums inside. Then, with your permanent marker, set a label outside the box so it would be simple to identify the things that are inside the box.
Whether or not you are a collector of vinyl record albums, it is important that these albums are kept and handled well to retain their value for as long as possible.
