subject: Tips Solving Acekard 2i Not Working on DSi | Ishopvideogame [print this page] Author: ishop videogame Author: ishop videogame
Nintendo DSi Firmware 1.4 is available now. This is a good thing originally, but as a result many people found that their Acekard 2i which worked well on old ds lite could not work on DSi. Every time they placed the acekard 2i in dsi, and it recognizes the icon in then menu. When they clicked it, such a word like "An error has occurred. Press and hold Power Button to turn the system off. Please see the Nintendo DSi Operations manual for help troubleshooting." appeared. No matter how many times they tried and went through all the tutorials, it would do the exact same thing. As this happens, do not panic. Your Acekard 2i which worked well on old ds lite could not work on DSi. It is most likely that you need to upgrade your Acekard 2i because your dsi has got the 1.4 firmware. Do follow the tips below to upgrade your Acekard 2i. 1)Download happyday.rar from its website.( You can find it by putting "happyday.rar"in Google.") 2)Extract the file to your desktop. There should be two files. One with dsl and one with dsi in the file name. Depending on what console you will be using, choose the dsi file if your updating the acekard on a dsi, or the dsl file if you have a ds light to update on, Drag the file to your microSD. 3)Boot your acekard, locate the file, and run it. 4)Make sure you have a good battery life left or your ds is plugged in before you update. 5)Hit the the A button, and it will start the update process. After that it will be ready for your dsi 1.4 firmware. There is a very important point you should pay close attention to:
Update using the DSL file on the MicroSD and then put your acekard on DS lite, and update it. If there are still some problems, please click here. Source:www.ishopvideogame.com">www.ishopvideogame.comAbout the Author:
