subject: whether laptop uses lithium or nickel-metal hydride batteries [print this page] The activation of a new battery The activation of a new battery
Does not require the battery to charge for 10 hours to activate the battery activity, the normal charge-discharge method for activation.Dell Laptop BatteryACER Laptop Battery
Proposed method: According to the available information indicates that the activation of cell work should be completed in the factory, notebook battery factory with a little loss of power is natural in order to avoid damaging the battery. Activation of the battery protection circuit should be in no manner, with the circuit itself can be lithium battery protection circuit, this circuit's purpose is to avoid over-charging and discharging the battery, usually after the battery is full, the indicator light turns off when charging , the battery charge is not into power, then you then plug the power plug to recharge the battery in the face of what use it? From the battery can be seen on the status of the battery has not charged, the other to teach you a simple way to determine the battery can be there during the charging, the battery charge when the phenomenon will have a fever, after an hour when the battery is full (power do not pull the plug), you go to try the battery to see if the battery still hot? The results must be cold, because the battery is not charging and discharging state certainly does not heat. Notebook manufacturers are recommended at the factory for new battery 10 hours or more. Author of this opinion, should be taken into account that some notebook manufacturers a new user in the new battery charge time and can not fully grasp the skills, simply so that they directly charge ten hours, so this should be the business of expediency.
whether laptop uses lithium or nickel-metal hydride batteries
