subject: How To Mount Security Camera With Motion Sensor [print this page] A home is considered to be the safest place one can ever dwell in. But there are some situations in which the house becomes the target of intruders. To be able to monitor who's coming in and out of the house, a security camera is needed to be installed.
The most reliable security system used today is the security cameras with motion sensors. These devices would easily give a quick detection. There are two basic types of cameras with motion sensors. These are the hardwired and wireless cameras. Both of these cameras need a power source from either from a device or through a battery. In case the camera you're using is an old one, it's better to replace it with a new one. But you still have the option to use it; anyway, this page helps you mount a motion sensor into a security camera. Here are few ways to install cameras, whether hardwired or wireless sensor, in just a quick minutes.
1. Hardwired Sensor
This kind of sensor needs an outlet to have in order to have a power. Before you install this camera, make sure you have already spotted the specific area where you can mount it. The wire should fit enough from the control panel to the mounting area. If you're finished checking it, remove the cover of the sensor (front part) then mount it to the wall by using screws. Since there is an instruction provided, follow the guide given to properly connect the wiring. You will need to connect the ground wire and the positive voltage to the main power terminals of the sensor. Next, connect the two sensor wires to the terminals. Replace the cover on the front of the sensor. Afterward, test if the sensor picks up any motion by walking through the area. The red light indicates the sensor is has detected a motion.
2. Wireless Sensor
A wireless security camera is easy to install. However, they are more expensive that wired cameras. They are often battery-operated. To install this kind of camera, remove the backing plate from the sensor. Do it by pressing the tab and sliding the back off. Then, mount the plate to the wall where you want to put the camera. After a successful mounting do these next steps: install the battery, switch on the motion indicator light and slide the sensor to the backing plate. No matter what kind of camera you're installing, make sure to check if the motion indicator works. Try to walk around the area.
If you're not sure on how to install the security camera, ask someone who have tried mounting it.
For best result, choose the most effective and reliable security camera to help you monitor the people coming inside and out your house. There are some cameras that give full alert which are the best video cameras you need to further protect your home. Remember it's worth keeping technological devices for the safety in your family than paying bills in the hospitals.
