subject: Air Conditioning Installation - Tips On How To Make Your Unit Run More Efficiently [print this page] Getting a new air conditioning system installation performed is a very exciting thing to do, but you want to make sure you get the right size units. The size of your air conditioning unit is important, but bigger units are not always the key to a quality air conditioning installation. The size is important because you want your units to run at a consistent rate. If you buy your units too large, they will shut on and off all the time, which will not impact your electricity bill in a good way. If your unit is too small, your area won't be as cool as it could be, and on extremely hot days will run high constantly.
When all other factors are equal, such as price, size, and features then consider the unit's energy efficiency when getting a new air conditioning system installation. You want to look at the units for their energy efficiency, and this has been made easier with the Energy Guide tags that are on all of the units now. Just look for the brightly colored tags on all the units. It is considered to be quite efficient with a rating of 9.0 or higher. These tags are very helpful to allow you to see what kinds of energy costs you can expect when you begin to use the units after installation.
There are several tips regarding the actual installation of your system by your contractor of choice that will help you. Installing the unit in a shaded area and according the manufacturer's installation instruction is imperative. Make sure any bushes or shrubbery do not come close to the sides of the unit. The unit needs open air on all sides so that it can draw in air. Also, ensure that your contractor has looked at the electrical requirements for the installation of the unit to make sure your system is not overloaded.
Post installation, your new air conditioning system should be properly maintained. An annual maintenance visit by your HVAC professional is a good place to start so that small repairs don't turn into big ones. Make sure all filters are cleaned or replaced according to the manufacturer's instructions. Also, keeping your home as airtight as possible will reduce the wear and tear on your newly installed air conditioning system.
Ready to find out more essential tips on air conditioning installation? Don't wait to find out more. Get started today!
