subject: How To Make A Turbine Out Of A Turbo - Rebuilt Turbo Balancing Tips to Getting Perfect Turbo Turbine Balance [print this page] How To Make A Turbine Out Of A Turbo Right from the factory, a turbocharger comes perfectly in balance, meaning the turbo turbine is perfectly and spinning smoothly. Keeping your turbine balance perfect is important. If the turbo balance is off on a turbocharger, the turbine will begin wearing, performing ineffectively, and potentially break. The good thing is, there are a couple things you can do to keep your turbo balanced. The easiest thing to do in order to keep an eye on your turbocharger balance, is to regularly inspect your turbo and doing a turbo rebuild whenever you find something during inspection. In order to do an inspection, you should check the turbocharger with the car on and running, then later taking off the turbo and checking out the internals. Listen, look, and feel (when the turbocharger is off the car!) in order to find any initial problems. If the turbo sounds like its ticking, wearing, rubbing, or making any type of sound, you should always do a turbo rebuild, as small problems always lead to major problems, if not dealt with right away! How To Make A Turbine Out Of A Turbo As always' its best to take your turbo into a specialist and have them inspect, diagnose, and do the turbo repairs, but many people (like me) don't have a couple thousand dollars to fork over for their complete turbo rebuild. In that case, you can always do the turbo rebuild by yourself. All you need to rebuild a turbocharger are some tools, a rebuild kit, and possibly a turbo rebuild guide, if you need some help and don't want to break any parts on accident. In order to complete a turbocharger rebuild, the entire turbo is disassembled and reassembled. With every piece being taken apart, it is truly hard to keep the turbo balanced, during a turbo rebuild. The best thing to do is to have your turbo balancing done by a specialist, after the rebuild is complete. If you can't get your turbocharger into a specialist for balancing, you should take good care in remembering the process of rebuilding you turbocharger, remembering how tight each piece fit together, and knowing how to handle the turbine, so the turbo balance isn't changed, too much. Of course, this can be difficult; however, you can always get a guide to doing a complete turbo rebuild, which gives tips to remembering the process of rebuilding a turbocharger, along with tips to keeping track of the turbo turbine balance, during the rebuild. How To Make A Turbine Out Of A Turbo
How To Make A Turbine Out Of A Turbo - Rebuilt Turbo Balancing Tips to Getting Perfect Turbo Turbine Balance
