Board logo

subject: Why You Should Replace Your Spa Covers [print this page]


You want to promote good maintenance of the spa and it's cover. The following is some good info that you find useful when you are extending lifespan of the equipment.

The conventional spa cover is replaced every 2 yrs, either on account of cosmetics or other factors.

Should it look like your spa cover has gained weight or is definitely unusually heavy? That's probably because foam inserts have started to absorb moisture from your spa, and possess become water-logged, possibly dripping brown water back into your spa.

There are two major factors involved in keeping your spa cover healthy, also extending lifespan of your spa itself.

First, let's start with the vinyl...

The majority either do not know or choose to not ever treat their vinyl with recommended products grant it's life. Consider it since the dashboard of a car on the 1980s. Without proper treatment, the dashboard cracks, breaks, and ultimately falls apart, offering bad cosmetic presentation on the area to which your spa resides. With proper treatment, the vinyl material of the cover should last 5 years, if not longer, also based on conditions.

Second, the heat-sealed plastic to shield your foam inserts, plus the foam inserts themselves, the major contributors to insulating your spa and making an effort to keep your energy bills down as a spa owner...

The top killer of a spa cover is chemical abuse. Sounds odd, right? Well, once you treat your spa with pH adjusters, water purifiers like bromine, or other chemicals, were you aware it is strongly recommended to leave your spa uncovered for about 1 hour after treatment with Any good chemical? This permits the spa to breath, increases the chemicals time to blend while using water and help prolong the life span of your spa cover by not having the chemical vapors or bubbles reaching the plastic encasing the foam boards that comprise most of the cover.

Also bringing about short life-span of a spa cover is unfortunately, our mother earth. Especially if you have a designated spa cover that does not allow water to run off, but to pool on the cover. While most covers are rated to aid over 200lbs, why put it for the challenge when you don't have? Water weight, snow, tree limbs and instead gives off, animals nor humans belong on the spa cover as far as things can cause the foam to bow, and finally break.

Hopefully this helps and thanks for reading! We will have more in the future.

We hope you find this post to get helpful, and should you have questions, or are merely trying to find the next spa cover, feel free to contact us! Find interest in and offer direct experience on earth of Spas and related equipment while it has complexities that are not present in other fields. We certainly have worked to get a in a variety of fields, including those of spa cover manufacturing.

by: Aftab_abbott




welcome to loan (http://www.yloan.com/) Powered by Discuz! 5.5.0