subject: Uses For Angle Grinders [print this page] Angle grinders are used for grinding, cutting or even polishing, depending on the job. The angle grinder is a hand-held power tool. It uses replaceable discs that can be fit to the grinding surface and job needs. Bearings used in the angle grinder make it easier to use. This allows you to do the job without a lot of force needed.
Most angle grinders are for work on cars and in construction work on metal surfaces. However, they can also be used at home for smaller projects. The way to choose the correct angle grinder for your job is to decide what disc size you will need and how powerful the motor needs to be. Discs come in many sizes and density. The most common sizes are anywhere from 4 inches to 12 inches. They also have a wire brush that can be used on an angle grinder. Other things to consider are the sources of power, do you need an electrical, gas powered or one that runs on compressed air? The larger disc size, the larger the motor size needed. Your needs dictate which type of angle grinder you will need for your project.
Angle grinders are a very versatile piece of equipment. You will find car repair garages that have angle grinders to remove rust on cars before they are painted. At a construction site, the tool is used to remove mortar and concrete. It can be used for routing jobs or polishing also. With the right disc, you can cut through things like rebar, tiles and cement. You can use it around the house for things like cleaning mud or rust from garden tools, such as a hoe or shovel. Alternatively, it might be utilized to restore edges on your lawn mower blades.
To be safe while using your angle grinder, you should wear gloves and protective facemasks. Unplug the motor, or make sure it is turned off, before you change the disc. Make sure that bystanders are far enough away when your angle grinder is in use, so as not to hit them with any debris that might fly out from the grinder. Use the shield guard where possible.
