subject: How To Use Foam Insulation For The Perfect Attic Insulation [print this page] Attic insulation can be very simple to do yourself if you know what you are doing. First of all know what type of insulation is best for your attic. Either slabs of insulation called batts or rolls of insulation. Loose fill is another type but it has to be installed by a professional as the process is more complicated that the others.
If you want a long lasting and very effective insulation, foam insulation is one of the best, but it is harder to install and therefore it must be installed by a professional. Foam insulation is also a bit more expensive than the other methods because it offers the highest R value in insulation and is also the longest lasting method of insulation.
Before buying your insulation it is highly recommended to measure your attic and the buy a little bit more than needed just in case, unopened packs can always be sent back to the shop. By measuring before you can also see what type of insulation is better for your attic space. Buying a cover for your insulation will stop any damage or condensation to your insulation. Brown Kraft paper or fire-retardant foils are two very good choices.
Installing attic insulation is a very simple job that one person can complete in the space of a weekend if fitted in a proper manner. Start at one end of the attic, making sure you put weight onto open joists. Start placing the batts or unroll the insulation between the joists. Butt down the rolls making sure not to butt them very hard as not to damage the insulation, the same is done with the batts. Use the utility knife to cut away remaining fibers and any areas that touch electrical items as not to cause a fire.
Before beginning the installation of your attic insulation, make sure you have all of the utilities needed. Long gloves, respirator, knife, goggles or glasses, and long sleeved clothes and pants are some of the necessary utilities to prevent irritation that the fiberglass can cause.
