subject: Smart Tips to Measure the Depth of Sink [print this page] Whether you are going to do a full remodel, or you want to get your sink looks better, replacing your kitchen sink may become a quite difficult task that you should undertake. Before you are going to replace it, there are several things that you need to consider. When you search for a sink, it is more than just finding one that you like, but you also have to find the sink with the correct size for your counter. It means that you have to make the right measurement. In order to get the best result in replacing your sink, you should measure the width, the length, and the depth of the sink. While measuring length and width can be fairly easy, measuring depth is not as obvious. Therefore, you need to learn on how to measure the depth of the sink so that you can save an extra trip to go to the store. Just check out the following tips and get the easy way to measure the depth of sink.
As the first step, you need to lay your straight edge across the sink. It is not a problem whether you are going to lay it width-wise or length-wise. What you have to underline here is to make sure that it lays flat across your sink.
The second step is to place the end of the tape measure in the bottom part of your sink. After that, you need to rest this end on flat area that surrounding the drain. It is suggested for you to not measure from the drain itself. It is because this is actually from where you will start the measurement.
The third step that you should do is to extend your tape measurement upright to the straight edge until it can cross the straight edge. Lastly, in order to determine the depth of your sink, you have to take the measurement where your tape crosses the straight edge.
