subject: Using a Dial Height Gage [print this page] For those who want to recognize the height of certain object with extreme degree of accuracy, using height gage would be the best choice. Although it is available the newer height gage with digital read-outs today, using the traditional dial height gage will provide you with the same range of accuracy. In order to get the correct measurement in using dial height gage, you need to learn on how to use this tool properly. Thus, you will be able to decrease the range of error in the measuring process. At this time, this article is going to give you some important tips for using a dial height gage. So, just take a look at the following tips.
As the first step, you need to clean the height gage and the working surface from any dust or debris in order to insure the accurate readings. You have to make sure that you clean and wipe dry the surface of the gage ruler, the measuring jaw, and also the object you want to measure.
The second step that you should do is to place your height gage on the flat and even surface. Then, you need to loosen the screw holding of the measuring jaw in place. After that, you need to check for ensuring that the measuring gage can move freely and smoothly, and the dial is reading accurately.
The third step is to lift the jaw of your height gage so that the top part of the object you want to measure can be cleared and then you need to place the object underneath the jaw. Do not forget to make sure that it is resting flat and evenly.
Lastly, you need to lower the jaw of the gage so that it can rest on the top of the object that you measure. You will find that the dial will accurately read the height.
