subject: Increasing Your Home Efficiency Using Attic Insulation [print this page] Insulation is one of the most effective ways of increasing the home efficiency, and, is a cost effective solution available in the market today. Insulation is used to cover the areas of the house, in order to save energy and restrict the heat flow. A house loses more than 40% of the heat through the ceilings and walls, because of which more power is consumed for maintaining optimum temperature. It is seen that most of the houses consume majority of the energy to keep it cool or warm. By installing proper insulation, the flow of heat can be restricted within a house, which would subsequently stabilize the temperature of the room. Home insulation is a method that helps in making your home comfortable as well as energy-efficient by reducing the heating or cooling costs. There are several measures that are being incorporated for insulation these days. Among the various measures available, insulating the attic is most beneficial, as maximum heat enters the house through this section. The solution to this is called attic insulation. It is the most widely preferred medium for increasing the home efficiency. By installing attic insulation, one can prevent the heat penetrating inside the room from roof tops. It is done by insulating the gaps of the attic section by sealing it with the use of proper insulators; this in turn will help in reducing the convection and radiation effect of the heat. Heat flows from warmer areas to cooler areas. It is done by either of these three ways: convection, the transfer of hot air from one place to another; conduction, a method where heat is delivered from one mass to other, and radiation which means that warm mass transfers heat to the colder mass. The main function of attic insulation is to minimize conduction and reduce the convection & radiation effect of heat. This causes the place to stay cool in warm weather and hot in cooler weather. Different types of Attic Insulation are available these days, but which one to opt for depends on the climatic conditions of your area and your specific needs. Two factors that should always be kept in mind before selecting the insulating materials are cellulose of the material and the R value. If the temperature of the area is extreme, then the value of R should be increased, and vice versa. Incorporating insulation at your home will not only reduce the electricity bills, but will also increase the efficiency of your home.
Increasing Your Home Efficiency Using Attic Insulation
