subject: Fluid Sealing Products In China In 2010 Reached 35 Billion Yuan Needs [print this page] Present, China's agriculture, water conservancy, energy, transportation, information, Building And environmental protection industries developed rapidly, which requires a large number of Machinery and equipment To meet their development needs. With the industrialization and Automation Raising the level of the equipment required supporting a large number of high-performance and highly reliable pneumatic and hydraulic seals. Preliminary estimates, by 2010 domestic hydraulic, hydraulic, pneumatic and sealing products total demand will be 20 billion yuan in 2005 (of which about 900 million U.S. dollars of imports and exports nearly 300 million U.S. dollars) to about 350 billion (of which about 1.5 billion U.S. dollars of imports and exports about 500 million U.S. dollars). Among them, the hydraulic products from 100 billion to 200 billion, hydraulic products from 10 billion to 20 billion, pneumatic products from 30 billion to 50 billion, sealing products from over 30 million increased to 7.0 billion yuan.
Agricultural machinery According to estimates by 2010 the annual demand of about medium and large horsepower tractors up to 10 million units, combine 5 million, other types of agricultural machinery have also been increasing, 2010 year, medium and large horsepower tractors have around 130 million units, combines about 40 million units. According to 2003 industry Sell Destination statistics, hydraulic products Agricultural Machinery OEM auxiliary hydraulic total sales accounted for 4.9% (retail part were not included). Therefore, agricultural facilities, maintenance, hydraulic and pneumatic seals would be a great growth market demand.
Intensive agricultural products Gear Pumps, piston pumps, multi-valve, cylinder and so on.
Construction Machinery Engineering Machinery is the largest user of hydraulic products, accounting for 42.3% of industry sales, the ratio will continue to expand in the future, so crucial to the development trend of engineering machinery. It is estimated that by 2010 Hydraulic excavator Annual demand of about 60,000 ~ 80,000 units Bulldozer (120 horsepower) ten thousand sets Loader About 100,000 to 12 million units, the ground plane was about 2000 units, roller about 1.5 million units, about 2 million units of cranes, Forklift About 8 million units, Cement Mixer ten thousand units. In addition, China now has about 140 million units of construction machinery is expected to reach 200 million units in 2010. In another development, the annual domestic production of excavators, road machinery, cement mixer, and assorted imported hydraulic parts, about 1.5 billion U.S. dollars. In short, for construction machinery, maintenance and use of hydraulic and seals the market will face a new period of great development.
These projects require a large number of high-performance mechanical products, long-life high-pressure piston pump, high pressure gear pumps, high torque motors, wheel motors, multi-valve, fuel tanks, steering and so on.
Metallurgy Mining Equipment It is understood, metallurgy equipment hydraulic and pneumatic technology usage reached 6.1% ~ 8.1%, accounting for 10% of the total cost of equipment about. Statistical analysis from the industry, hydraulic, pneumatic products for the metallurgical industry accounted for directly supporting sales 14.5% and 9% (excluding the retail part). It is reported that annual imports of metallurgical industry for the repair of hydraulic, pneumatic and sealing products to tens of millions of dollars. Therefore, metallurgy, mining equipment, OE and repair of hydraulic pneumatic seals demand will grow significantly.
Metallurgical and mining equipment will need a lot of piston, valve, solenoid valves, proportional valves, servo valves, cylinders, complete hydraulic system, pneumatic components and a large number of seals.
Machine With the advances in manufacturing technology, the domestic high-precision, high efficiency, automatic machine tools, in particular, CNC machine tools Demand is growing. According to estimates by 2010 the annual demand for CNC machine tools in China more than 5 million units; machine total ownership from the current 300 million in 2010 to 400 million units. In addition, Forging The development of mechanical hydraulic components and complete systems on the new requirements. Therefore, machine tools, forging machinery, maintenance and use of hydraulic, pneumatic and sealing parts of the market demand will increase significantly.
Machine-intensive high-pressure, high flow piston pump, valve, solenoid valves, proportional valves, servo valves, low noise vane pump and light piston and so on.
Plastic Machinery Plastics machinery in 2010, demand is about 15 million, of which Injection molding machine About 40%. China Plastic Machinery now has about 40 million units in 2010 about 80 million units. Although small power injection molding machines have taken Electricity Transmission of the development trend, but according to analysts, the next few years, due to Plastic Products And cost and other reasons, in addition to high precision, high efficiency, high-quality products require electric drive away, China will drive a lot of fluid. Therefore, plastic machinery, maintenance and use of hydraulic, pneumatic and sealing parts of the market demand will still maintain a rapid growth trend.
Product requires a large number of plastic machinery, high pressure variable displacement piston pump, vane pump, valve, solenoid valve, proportional valve and servo valve.
Car Motorcycle According to expect an annual growth rate of 10% to 15% per annum to 2010, China's automobile output will reach 7.5 million to 800 million units, of which cars accounted for 50%, or 400 million , 1.7 million passenger cars, truck 1.8 million, about 12 million motorcycles. 2010, car ownership is around 50 million or so, the motorcycle has approximately 100 million, when annual production and car ownership in China will be highest in the world. Therefore, for the automotive, motorcycle host matching, maintenance of hydraulic, pneumatic and sealing of the market demand will grow significantly.
The product requires a lot of power steering pump, various types of seals and pneumatic components; automobile manufacturing equipment you will need a variety of hydraulic pumps, solenoid valves, hydraulic systems and pneumatic components such as high performance.
Oil Chemical Equipment Future land and sea around the state oil and gas development, in addition to being the construction of "natural gas" and petrochemical projects, the "Eleventh Five-Year Plan" period, will be the new oil pressure Pipeline 5000
Km, while during this period of the oil refining, Ethylene And three synthetic materials ( Synthetic resin , Synthetic Rubber , Synthesis Fiber ) Demand will be 6% to 9% growth rate increase. This requires a large number of oil and gas pipeline gathering and transportation equipment and large efficient petrochemical equipment, focusing on the development of the desert, ocean large-scale oil exploration and drilling equipment, annual output of more than 600,000 tons of ethylene, 450,000 tons of synthetic ammonia, 800,000 tons of urea and Fiber And other large equipment. Thus, complete sets of equipment for the petrochemical industry and maintenance, hydraulic, mechanical seals and stuffing static seal, etc. demand on
