subject: power adapter should not be placed in direct sunlight and well ventilated place [print this page] To create a good environment cooling ThinkPad X41 Adapter Sony PCGA-AC19V7 Adapter
In the high temperature environment when using a laptop, power adapter should not be placed in direct sunlight and well ventilated place; not to the power adapter on the notebook's cooling air outlets in the vicinity, otherwise the heat not only the power adapter distribution does not go out, but also absorb some heat. In the hot summer, we can put the adapter side to increase the contact area of the adapter and the air so that the heat better dissemination of the adapter out. In order to obtain better heat dissipation, we can pad between the adapter and the desktop into a narrow plastic blocks or metal blocks, to increase the air convection around the adapter speed, speed up the adapter's heat.
2. An exception should be promptly discontinued
Work in the power adapter to issue a larger noise even when smoking is often damaged or have problems, should immediately stop using, by professional engineers through inspection before it can once again put into use.
3. A reasonable charge
When the notebook computer battery is charged, it is best not to run the big 3d games and other heavy workload to machine process, so that the output power due to the power adapter is not enough spare capacity and slow down or cause the battery to charge fully satisfied overloading and other power adapter.
In the high temperature environment when using a laptop, power adapter should not be placed in direct sunlight and well ventilated place; not to the power adapter on the notebook's cooling air outlets in the vicinity, otherwise the heat not only the power adapter distribution does not go out, but also absorb some heat. In the hot summer, we can put the adapter side to increase the contact area of the adapter and the air so that the heat better dissemination of the adapter out. In order to obtain better heat dissipation, we can pad between the adapter and the desktop into a narrow plastic blocks or metal blocks, to increase the air convection around the adapter speed, speed up the adapter's heat.
2. An exception should be promptly discontinued
Work in the power adapter to issue a larger noise even when smoking is often damaged or have problems, should immediately stop using, by professional engineers through inspection before it can once again put into use.
3. A reasonable charge
When the notebook computer battery is charged, it is best not to run the big 3d games and other heavy workload to machine process, so that the output power due to the power adapter is not enough spare capacity and slow down or cause the battery to charge fully satisfied overloading and other power adapter.
power adapter should not be placed in direct sunlight and well ventilated place
