subject: Guide On How To Change The Shower Stall [print this page] There are quite a few simple residence enhancement projects that can improve the look of any room within the house. Changing an old, dingy trying bathe stall can make any bathroom look much more visually pleasing. Anybody can easily substitute a shower stall without the help of a professional utilizing a prefabricated bathe stall. There are a few tips that can help anybody planning to take on this home improvement toilet project.
As with every dwelling enhancement project, it is very important be prepared. Before starting the undertaking, be sure that all the crucial instruments are handy. A one piece, prefabricated bathe unit could be bought at any dwelling improvement store. Tub and bathe adhesive, along with caulk and galvanized screws will probably be wanted to safe the bathe stall in place. Concrete nails, a hammer, and shims could also be vital for serving to level out the underside of the unit.
Before removing the old stall, be sure to shut off the water supply traces to prevent any mishaps or harm during the installation. The existing shower stall could be eliminated by cutting alongside the caulking with a utility knife and using a flat pry bar to separate the panels from the wall. A jigsaw can be used to cut the panels into smaller pieces, which can make for a neater disposal.
Put the preformed bathe unit in place and use a level to guarantee that the underside is even. Whether it is unlevel, shims can be utilized to level it out. The shims will should be nailed to the concrete floor utilizing concrete nails. After guaranteeing the unit is degree, take away it from the realm to use the adhesive. A bathtub and shower adhesive must be utilized to the bottom of the unit and then positioned over the concrete base. Before securing the unit in place, make sure that the drain gap is placed immediately over the drain pipe.
Holes should then be drilled into the panel partitions of the prefabricated shower alongside the wall studs. Galvanized screws ought to be secured via the drilled holes and into the wall studs. Finally, apply caulk alongside the edges of the shower unit to maintain it sealed tight.
Self-executed home improvement tasks are a great way to spruce up any residence while nonetheless saving money. Prefabricated shower stalls could make home enhancement toilet tasks a breeze. Following a few hints when installing these showers will assist the final consequence to appear as skilled as possible.
