subject: The Way to Install In-Dash Car DVD Players in Your Car [print this page] Car DVD players are good things for the people when they are travelling with the car, they can bring so much entertainment to us. With it we cannot think our road time is so boring and tedious, we can enjoy our time wonderful and beautiful so much. Therefore, to get a car DVD player in your car is very necessary and useful for us, especially the in-dash car DVD players. In-dash car DVD players are the very huge way to add the high quality mobile video to the vehicle for us. Those of the equipments are very available from a lot of the manufacturers at a wide range of the prices. However, there are always some of the people do not know how to install the in-dash car DVD players in the car, here as the followings are the steps which can help you for all of the things:
The first step for you to install in-dash car DVD players in your car is that you should go to open the hood of your car to disconnect the car battery, you also can disconnect the negative cable only, it also can be safe for you. But the best way for you is that you can go to disconnect both of the positive and the negative cable at the same time.
The second step for you to install in-dash car DVD players in your car is that you should take out the screws holding the factory stereo in the dashboard of your car with a proper screwdriver, and then go to remove the stereo from the dash. You can have to remove the parts of the dash in order to take your stereo out.
The third step for you to install in-dash car DVD players in your car is that you should remove the connectors from the stereo back carefully and then check it to confirm they are not broken or dirty.
The fourth step for you to install in-dash car DVD players in your car is that you should buy a wiring harness designed for your vehicle at a car audio and video equipment dealer for aftermarket installation. You can connect it to the car one; check the instructions for the proper connection.
The fifth step for you to install in-dash car DVD players in your car is that you should insert the in-dash car DVD player in the aftermarket installation kit head unit. Take care for buying an installation kit matches the car make.
The sixth step for you to install in-dash car DVD players in your car is that you can connect the other end of the wiring harness to the back of the car DVD player and then connect the antenna cable to the antenna input on the player back. You can insert the player and the installation kit in the dash for your car, to put in any required screws and replace any dash removed panels. You can replace the battery cables and confirm they are tightened, and then close the hood and turn on the car. If the panel light up, it shows everything is ok.
The Way to Install In-Dash Car DVD Players in Your Car
