subject: How to install the laptop key [print this page] If the Laptop keys, for the people who do not know the structure of the Laptop keyboard , it will be very difficult to install, or he will install it with a hard press up. In fact, if they understand these subtleties, they would have discovered that in fact very simple. I remember when I first lost the "v" key on Toshiba Satellite L300 Laptop Keyboard, i really have no ideas on how to install it, pliers, tweezers are all used, but i finally beated by this small thing. Then I angrily take it to the repair shop. My self-esteem is damaged, the engineers solve it in 5 seconds, He also re-removed reload button a bit. Then I discovered that the main reason for my loss is do not know the structure.
Below is the specific methods:
First of all, you must know laptop keyboard keys structure, which is very important. To know the structure, you have to know how to remove the button. That experience taught, ease of access keys is so easy, how to take it out? Just breaking directly. Pull the Button in the top of, use a little something for a pull toward the direction of their own (as some key sequence different emissions, but also be horizontal pull), the key was removed, then two kinds of results may occur, one is just pulling out of Cap, and the other is to pull together even the buttons stand out.
No matter what result is, the problem is how to install. The key can be separated into 3 parts. Generally speaking, direct snapping will not pull out all together, most cases are only the Caps. Then you can see the connection Caps and keyboard is a "X"-shaped, white bracket (usually white), it is very strong. The keyboard is loose because the white bracket 4 feet embedded keyboard are not all in place, then you need to reset them on the line, then the button is easy to look at their counterparts. Then Cap alignment.
If the support is pulled out together, id does not matter, first you have to pull down everything separately.and then you can bring something to it to separate into three parts. When the first black frame and install the "X"-type bracket that fit together easily and then they can be security on the keyboard, not Cap's shield, this process is very easy. Then you can press the Caps packed bracket.
The step is so simple:
First: Before installation, and support and the Cap are separated;
Second: Install the support firstly then install Caps (otherwise is a very strenuous);
Third: to reiterate that when Cap attached scaffolds , do not force to install buttons, so not only time consuming, but in vain.
With this instructions, If keys loose or lost in the future, you can repair it by yourself. Similarly,if your keyboard is dirty, you can remove the buttons and clean.
