subject: Discussion: UV Ink-UV Ink prospects, the market - the printing industry - ABS Coil [print this page] If a Print Plant has still not been brought to you UV inks, then it is from the collapse of the state very soon.
Reason why we said that if a printer has still not been brought to you UV ink, it can not be far away from the closure of the day, it was because the printing UV printing through a lot of tangible benefits received. For example: shorter production cycle (UV ink only a few seconds to dry on the printing press) and more Environmental protection Production methods (UV ink does not use solvents, and emissions of harmful gases than conventional ink less) and so on. Although UV inks possess these qualities is an objective reality, but this does not mean that you can use on any piece of a live UV ink.
UV ink printing can benefit UV inks and conventional printing process used in the ink is completely different, it is a two-state materials: the acceptance of UV light exposure before the liquid state, after the equipment will become solid state. The printing of this ink the same as with traditional ink, but it can press on the light irradiation instantaneous drying.
Because UV ink can see the light in the sheets while drying, so that sheets can be as long as the press immediately look into the next production step. If the use of traditional ink, printing ink to be let completely dry, which means that printed page is always to be placed in the night, so use of UV inks allow printing in a shorter time to complete more work.
Traditional printing inks generally contain chemical solvents?? Some ink contained in the ratio of chemical solvents and even reached 70%. With the traditional ink drying, solvent will evaporate, and the VOC (volatile organic compounds) emissions to the atmosphere.
These compounds can cause serious harm to the environment in some areas restrictions have been adopted VOC emissions and VOC content of products in the largest law. If a solvent-based inks allow printing in their own factories disappear, we can reduce the printing production harm the environment, and meet the local requirements of the relevant laws and regulations.
UV ink printing buyers can benefit from
In addition to printing other than printing buyers and Design Teachers can also use UV inks in the process got a lot of benefits. The following conditions can help you determine whether a living document for use UV inks.
It is a living piece of emergency. As UV ink drying quickly, so you can use less time than traditional ink to complete orders.
You are using a non-coated paper, and want to get clear text and images. Traditional ink will penetrate into non-coated paper, but UV ink can be dried in seconds, so it does not penetrate into the paper in time. Whether using traditional inks or UV inks, printing must be expanded to assume responsibility for network control, so you let them know that you want to see the finished product on a clear content.
Your using a non-coated paper, and you want to get as smooth as satin effect. UV ink allows you to get in the coated paper with the same printing results.
You want to control the number of stains and wear, because UV ink can be dried quickly in the press, it has more than the traditional ink stains and abrasion resistance capabilities.
This sounds good, but whether that is true? I have given the answer is: pretty close. In fact, a living piece of ink in the proportion of production costs is not large, but if the printing with UV inks, printing presses would choose for the different Blanket , Drum, ink and coating materials.
If you are interested in UV ink, it should be before making a final decision, and discuss the use of UV printing inks and conventional inks cost differences.
UV coating You can page the entire page or some regions of UV coating.
Coating solution is a transparent material, it is UV light irradiation with UV inks reflect the occurrence of the same?? Its cure rate is very fast. Fulin Special Group North America, chemist and project leader explained MarkLatunski people are willing to adopt this method after the processing of the reasons, he said: "UV coating allows printing immediately, the higher light effect."
He added that if the traditional coating and UV ink printing on the printing is completed in a couple of days to spend time waiting for ink to dry completely, then you will be able to get the best machining results. On the contrary, UV coating will be showing a uniform look, because the tradition has not completely dried ink to continue drying in the coating.
In addition, UV coating can not increase or decrease the thickness of the flexible printed case for adding a protective layer against wear their troubles. If you want to be in traditional UV ink on the coating, more time should be prepared and to ensure their own printing press also has the same sufficient time.
UV ink?? Summary UV not only help you get the coveted printing results, but save your time for print to provide another layer of protection. But you live to calculate the good parts of each printing costs, in the traditional and the UV ink to make the right choice. In addition, if you want to be in traditional UV ink on the coating, should consider the issue of time is sufficient.
Discussion: UV Ink-UV Ink prospects, the market - the printing industry - ABS Coil
