subject: Three-ring medium speed micro powder grinding mill works [print this page] Grinding mill for barite, calcite, potash feldspar, talc, marble, limestone, ceramic, glass, etc. Mohs hardness of not more than 7, and humidity below 6% of non-explosive mining, chemical, building materials, metallurgy and other industries than 280 kinds of materials, the grinding mill process, product size in 100--425 be adjusted within the target range.
Grinding mill work process:
Will need to crush the material into a continuous uniform host Raymond grinding powder room, when the centrifugal force due to the rotation, the roller swings outward, pressed on the grinding ring, shovel blade material to the grinding roller and grinding ring of , the result of the rolling roller to achieve the purpose of crushing.
Materials after grinding, grinding mill into the analysis with the circulating air blower machine sorting, fine through coarse materials will be re-grinding Luo, qualified with the flow of powder into the finished product is cyclone powder collector through the powder discharge tube, that is the finished product.
In the grinding room has been grinding for a certain material in the water, grinding, heat, moisture evaporation, and the whole of the pipeline interface is not tight, the external gas is inhaled, the circulation increased pressure to ensure the Grinding mill work in the vacuum state , the increase in gas flow into the dust by more than duct was purified into the atmosphere.
Three-ring medium speed micro powder Grinding mill gear driven main spindle and motor through the layers of dial rotation, wheel driven by sales of dozens of columns in the grinding ring ring rollers rolling and rotating within the roller. Bulk materials are hammer crusher into small particles into the storage silo by a hoist, electromagnetic vibrating feeder evenly to the material on the turntable in the middle of the action of the centrifugal force the material scattered around the circle, and fall into the ring roller Grinding mill is within the ring roller stamping, roll grinding, polishing and grinding, materials are crushed and then fall into the first tier second tier third tier, high pressure centrifugal fan to suck the outside air suction machine and after smashing through a third layer of coarse powder with a selected machine. Internal rotation of the powder produced by the vortex turbine coarse material down to heavy grinding, the powder with the air into the cyclone powder collector by the bottom discharge valve discharge shall be finished, and the air with a small amount of fine dust then purified through pulse filter and muffler through the exhaust fan.
Three-ring medium speed micro powder grinding mill works
