subject: How To Diy Your Own Silver Jewelry By Silver Clay Part 2 [print this page] 7: How to make sure the pure of silver? Jewelry crafted by Silver Clay contains 98% of silver (because doing it would be adulterated, or up to 99%), with the national center for jewelry appraisal inspection report as evidence. If you do not believe, then you can take your work to the market of gold and silver firing processing shops, real silver blue streak!
8: My Silver Clay work is broken, what should I do? If Silver Clay is not burned, it could be wrapped well with water, wait until soft, and you can immediate reuse. If If the silver clay has been fired, that is no way to fix it, because the Silver Clay is made specially, so please double check your work before burning it.
9: Why does my Silver Clay is dried? Because Silver Clay in the water will evaporate in the air, you can store moisture film or sealed bottles. You can put some water after shelving for a long time, then to regular water, so that Silver clay become soft and can be used to produce.
10: How long does it take to DIY silver jewelry? Generally we need about 1 hour to finish it see, which depends on what size and degree of difficulty it may be. Plastic: probably 10-20 minutes, no more than 30 minutes, because if the time is too long, then silver will be evaporation of soil moisture inside. In that case the difficulty will increase production, so we must be in operation during the step by step, the soil not done first should be with air isolation. Drying: probably 10-15 minutes, because if done well, then drying, the product may be cracking! Patch: 5-15 minutes probably, before and after different degrees of repair, the repair is finished before the firing is very necessary. Firing: probably about 10 minutes depending on the size. Revised model: about 5-10 minutes, after firing, the finished product needs to be in the repair and refurbishment of miscellaneous side. Polish: about 10-15 minutes.
11: About Mitsubishi brand of Silver Clay, PMC3 at the market. There are three silver clays, Mitsubishi PMC3, Matsukawa silver soil, there are some with no names, and the price is different. Mitsubishi PMC3 is the most expensive silver clay, followed by Matsukawa, and then those with no names.
12: DIY Silver is considered to be the same as traditional silversmith, in fact, its wrong, silver is not the usual silversmith, but through the Silver Clay, you can put your feeling, love, family and friendship into your own unique style, and give as gifts are particularly valuable! DIY silver jewelry is the trend, young people like it because it makes you realize individuality, because its special, so it will never be out of date no matter how long after.
