subject: Battery Activation Process Significantly [print this page] Test method: using the E398 does not activate the original battery 2, the basic use of Scud Block enrich my knowledge.
Test time: in March 2005 has
Testing process: a new line of direct charge for broken by a few times, buy a 15 Scud Block enrich my knowledge, full of 6 hours or so. Normal daily use E398. 24-hour standby
The results: cell activation process significantly: In the beginning days of standby time in about 1 day, a few times to use two batteries were about 2 days and 2.5 days 24 hours a day, the first grid electricity use 2 days, after the two cells electricity use 5 to 6 hours. Until now, two battery standby time has reached more than 4 days, the first grid power can sustain 2.5 to 3 days, the remaining 2 cell electric pole is about 1.5 days.
Conclusion: The lithium batteries do not need activation, not for a long time charge, full can, you can use with the filling. Batteries in use slowly activated.
Internet access to some information, lithium and nickel-metal hydride batteries from the structure starting from the theoretical to clarify this issue, Ni-MH battery does require activation, but not lithium. Phone comes with its own power protection, meaning there is no charge for a long time. If not protected, uninterrupted power for a long time to charge the battery operation, will only result in excessive consumption of lithium ions. May be conducive to rapidly activate the battery, but battery life of their own will be very reduced. So I hope that an objective approach to this problem, do not others, and causing unnecessary wear and tear. Laptop Battery
