subject: How To Build Fm Transmitter At House [print this page] How to Build FM Transmitter at house How to Build FM Transmitter at house
If you are interested in radio, you can build your profile a FM radio transmitter. A transmitter seems to be this: a small tool that can send radio signals, mostly accompanied by the antenna. If you want your home to build a launcher, it does not need a lot of high-tech equipment.
Steps for build FM transmitter at home
reduce your copper panels (about 3 X 5 inches) rectangular item, after which they were reduced from the copper (about 1 / 2 inch of each side, from an area of 5 small squares).
Stick on the panel square area of copper, and if you love glue. These will be speaking. Ensure that there is a 1 / 2 inches, the minimum size of the square.
Welding on the 9 volt battery connector square red wire, one of the welded joints in your black line to the panel itself.
Place a standard audio cable to make sure you still have to complete with music input jack. Reduce the cable so that it's about 4-6 inches in size.
Strip about 1 / 2 inch off the audio cable (the end you cut it the exact location), exposing the white and red wire. Solder the purple wire and the white line between the square of the board itself.
Your use of solder 1 470 ohm resistor 9 volt battery pad end of the wire to complete a vacant area of a welding the opposite.
Your solder a 27,000 ohm resistor completed using 470 ohm resistor pads, welding team completed the opposite direction.
Your solder 10 000 ohm resistors to the square of the end of a completely free and the complete opposite to the Board.
Wire tightly around your pen or pencil to your head, to create a coil. Solder the end of January of the coil wire with a 9 volt battery, the other to complete the remaining square meters flat.
Insert your 9-volt battery; insert the audio jack for audio players in any port.
FM stereo transmitter
One. Determine you want to use your transmitter. Some FM transmitters plug into the sound card, so you listen to MP3 or other digital files. Others are designed for transmission through the transmission of your home or property, all of the signal.
Two. Purchase stereo FM transmitter kit online or at an electronics store. Try to find a tool kit, its production providesfactory assistance" if you have any questions
three. Open the box. Remove the part of the record and evaluate the content within the field records. Ensure that all parts (capacitors, resistors, semiconductors, etc..) Should be in this area really is.
Four. Check part of the records of any product, you will need to make the transmitter, but not in the package. This may include a battery, audio cable, a CD participant or external antenna. Purchase any additional items you will like.
Five. Study through the assembly instructions, including assembly, and then start your transmitter pack.
Six. Begin building transmitter according to your instructions. You need a good soldering iron this step.
Seven. Alter your transmitter. Keep your test until you have chosen a short to an open FM radio band operating frequency.
Eight. Choose operating frequency. To comply with FCC guidelines, it is your responsibility to ensure that your operation will not trigger any of the broadcast reception interference. Check the receiving program using an empty one of the great FM band frequency and the external antenna.
9.Connect your FM transmitter to the main stereo program in your house. This will give you both will enjoy the stereo FM radio to listen to the other room.
10. Consider create a simple musical "mixed" panel or box broadcasting school or the community. The components are inexpensive and can be found at any electronics store
