subject: Information About Various Castings Process And Types [print this page] Casting history is older than 6000 yearsCasting history is older than 6000 years. A casting is also known is molding process in which any metal is poured in to the mold. It is one type of manufacturing process in which every metal poured in mold. Generally, casting is uses for creating desired an most intricate of shapes..
Casting can remove other operational processes like machining, forging, and welding. There are different types of casting method or process available today. Generally casting process is divided in to 2 types expendable casting and non-expendable mold casting.Temporary and non-reusable molds are used in expendable casting process. Sand casting, Plaster Casting, Shell Molding, and Investment Castings process are one of the expendable casting processes.
This is oldest metal forming or casting process. Lost wax casting used for to manufacturing of huge parts like turbocharger wheels, golf club heads, elect huge variety of parts ranging from turbocharger wheels to golf club heads, from electronic boxes to hip replacement implants. Lost wax casting used for investment castings. Today investment castings are used for aircraft engine and airframe parts. Lost wax casting is similar to the Lost Foam Casting in which expendable foam patterns are uses for casting productions. Foam pattern is remaining in mold during metal pouring and its replaced by molten metal
Die Casting Die casting is one of the non expandable casting process. Its one type of process in which molten metal is forced under high pressure into mold cavities. In die casting mold dies is used again and again for producing variety of casting size, shape and thickness. Parts, which are manufacturing by die casting are heat resistance and maintaining close tolerances. Die casting produces parts with thinner walls, closer dimensional limits, and smoother surfaces
Sand Casting Sand casting used for make large parts. In sand casting sand used with mold. In sand casting cavity is formed by wood or metal pattern. Using sand casting method, you can cast large iron bell, and alos small automotive parts. In sand casting, two types of sand used like green sand, which is mixture of silica, and olivine sand. Sand casting is uses for high volume production
