subject: A Number Of Weber Char Broil Grill Parts [print this page] There are many different pieces an individual can apply to their BBQ pit in order to keep it from going into a landfill. Weber Char Broil Grill parts are available online or through many of the larger department stores. There are replacement pieces or pieces that will enhance the grilling experience.
The heat plates seem to be the most often requested item for replacement in any of the series of gas grills. A Heat Plate #7000045 for the Char-broil grill is a large 11 3/4" x 5 5/8" which could be swapped out for the original factory heat plate. Sometimes they are referred to as 'flame tamers' and different models have either three or four each. A box of three or four could be discounted at many different businesses.
There are a number of stainless steel style heat plates, model number CBHP1 Char-broil S/S that will measure 11 3/4" x 5 5/8" and replaces many different kinds of burners. The Advantage and the Performance series of charbroil grills have a deal for a four pack of these heat plates which is the heating element are built to last.
Another component that grill owners need quite often is Char-Broil burner carryover tube part number 7000277 that will fit over burners CBP1 and CBPCI as well as the heat plate or flame tamer 700045. One other unit this carryover burner tube could be used on is the Char-broil Performance grill 461350805 model.
In addition to the grill pieces, there are cooking units that are easily attached to a gas cooking machine to enhance its performance. There is a cook grid set that is used in various barbeque machines and will become a substitute for models 80005724 and 80005665. This piece will also fit the MCM 66652, the Uniflame, Kenmore and Thermos grill machines and the Char-broil G515-0059-W1. It is model number 66652, the Char-broil Porcelain cast iron cook grid two piece set. It measures 18 1/4" x 13 1/8" each piece which means totally it has a measurement of 18 1/4" x 26 1/4".
There will be times when the rest of the meal is not fully prepared, therefore a Char-broil warming rack would fit nicely into the evening's dinner plans. There are currently over 30 Performance models which will fit the number 7000181 size. Advantage series of grills only has two separate grills this model number will fit on. There are many more of the Performance machines than the Advantage although both seem to be fairly popular with grill-masters everywhere.
Many times the legs are too small on Char-broil grill and they could use a 'lift'. This would be possible with leg extenders, in sets of two, model number 7000230. These leg extenders are used in over 45 different models in the Performance series and four different models in the Advantage grillers.
There are so many different Weber Char Broil Grill parts for various unique grilling machines that for a good fit, it is important for one to check with the owners manual first. Some of the replacement pieces are needed because the machines have been used over and over again, which is a good thing. There are other times new piece to the barbeque machine is required because of damage due to wind, rain or other natural type storms if the machines are left out in the elements.
