subject: Basics Of Replacing Countertops In Los Angeles [print this page] With the cost of services in this area, if you have are replacing countertops in Los Angeles you will want to consider doing the work yourself. replace countertops Los Angeles will also be a good investment if you are looking to solidify market value. Old counter tops can be very unappealing to prospective buyers. Those stains you just cant get off and the scratches do not make someone want to buy a house from you. It is also a nice change for you to spruce up your kitchen with something new. In this case we are talking about your basic laminate counter top. If you have someone more expensive or unusual you want to use like granite, you might want to get quotes from a specialist for replace countertops Los Angeles.
Before heading to the store to buy your new countertop, make sure you measure the existing countertop. You will want exact dimensions. If you want a countertop that is a little bigger, make sure it will fit with the room that you have. This is a good chance to get some extra counter space if you can. Take the dimensions to the store and purchase your new countertop.
The first thing you need to do is shut off the water to the faucet. You will need to disconnect the supply lines. Remove the drain trap. You are ready to lift the sink out. Get it out of the room so it is not in your way. Get help to do this so you do not drop it. You do not want to have to replace the sink as well. Make a trace of the sink opening on paper. Take scissors and cut along the pencil traces to make a template of the sink.
It is now time to take out the old counter top. Counter tops are usually attached to the cabinets underneath them. They are usually attached with brackets and screws. There may be some residual caulking along the wall that you will need to remove with a utility knife. Take care not to make holes in the wall with the knife. Lift out the old countertop.
The new countertop can now be placed over the cabinets. Use a level to make sure you have it level. If it is not level, use wood shims. You will now attach it to the cabinets in a similar fashion that you took it off except you will use new hardware. Keep in mind to place them in new holes in the cabinet because if you use the old ones they may not hold.
Now is the time to use the template of the sink. Place it on the new countertop and draw around it. You will then take a saw to cut around it. Smooth out the cuts with a jig saw. Get out your plumbers putty and outline the sink opening. Go find that sink, pick it up, and put it back in place. Hook back up the faucet connections. Caulk the gap between the countertop and the back wall.
