subject: Basics Of Bathroom Tile Remodel In Los Angeles [print this page] Tile is a great choice for bathroom floors and sometimes walls. It is functional and a bathroom tile remodel Los Angeles can add to the resale value of your property. Tile is can has the advantage of being moisture resistant and easy to clean. While you can find contractors to do a tile remodel Los Angeles, this is a job you can do yourself as well. It is a not easy but you can save a lot of money it yourself.
Before beginning, make sure you have the proper tools. Consult you local hardware store for the proper tile cutter and other tools. Buy or rent a CD on tile remodeling. You might also be able to watch instructional clips on the internet with a little searching. You may want to refer back to these as you get going on your project.
First start out by choosing the tile. You will want one that resists moisture. The best moisture resisters are semi high gloss or glazed. Decide if you want a small tile or a large one. Large ones have fewer crevices between them to clean but you have to be happy with the look of the tile. For a smaller room, choose a brighter color to make it look bigger. A darker tile will make it look smaller. However, for a larger bathroom, darker tile can give a cozier feel Tile texture is another choice. Remember this is what you will feel on your bare feet. A textured tile of rough cut marble or slate may not be as slippery and give a down to earth feel. A regular ceramic or porcelain is more traditional and easier to clean.
Preparation for installation is probably one of the biggest parts of the whole remodeling job. You will need to take out the entire toilet. Take care not to crack it. Make sure you turn the water off for the plumbing before detaching it. Get some help to move it so you do not injure your back. If you have a pedestal sink you will need to remove that as well. Place them where they will not damage anything else like in a garage. This is when it should be noted you will have to have an alternative bathroom during the project.
Install a backing for the tile. You will want to use cement board. It should be 5/8 inch thick for floors and inch thick for walls. It is important that your backing be moisture resistant and cement board is the best choice. Make sure you put mortar between the seams. Smooth it out so you have a good working surface.
You will now want to lay out your tiles in the manner in which you want them to look. If the colors of your tiles vary this is your chance to add a little decorating flair. Take the time to place them in different positions until you like the look. Remember that once they are in place, you cant move them. So, do not rush this process.
