loan

subject: Jaw Crusher work to be done before use [print this page]

Jaw Crusher is the most widely used one of

mineral processing equipment for stone production line, production line in the ore dressing

of broken material. Jaw Crusher is broken coarse material, fine the best equipment, crusher

equipment, routine maintenance can ensure a stable, well-functioning. Equipment maintenance,

we must first understand the device's structure, this article introduces Fortune mechanical

jaw crusher important part of the 6.

(1) double-check whether a good lubrication of bearings, thrust plate junction have enough

grease.

(2) carefully check all fasteners are tightened.

(3) Carefully check the belt is good. If there is damage phenomenon, should be replaced,

when the drive belt or pulley when there is oil, oil rag and wipe applications.

(4) Check the protection device is well and found that insecurity should be immediately

removed.

(5) Check whether the ore crusher cavity or

debris, if ore or debris, then must be clean, to ensure that the crusher cavity start.

(6) Check whether the return from the top bolts, gaskets group is pressed, T-bolts are

tightened.

Shanghai Zenith Mining and Construction Machinery Co., Ltd. is a high technology, engineering group. We are specializing in the research, development, and production of industrial crushing and powder processing equipment and pertinent devices. Our products have been sold to 120 countries and areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.

We hold "Pursuing the Zenith Technology and Quality" as our management concept all the time. Relying on absorbing world leading crushing and powder processing technology, advanced management and quality control system, as well as our full efforts have made our company earn high reputation among our customers.

Jaw Crusher work to be done before use

By: Jordan shu

welcome to loan (http://www.yloan.com/)