subject: Ultrafine mill to produce super thin powder for Pakistan customers [print this page] SCM Ultrafine Mill is designed by SBM engineers and technicians on the basis of over two decades production experience ,such as multiple innovation. we have been absorbing many technology advantages from the same field home and abroad. The grinder mill has been proved by our thousands of customers to be out-standing and stable grinding mill.
SCM Ultrafine Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, Fertilizer and mining etc. The grinder mill is applicable to non-flammable and non-explosive materials with Moh's hardness less than 9 and hunidity under 8%, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
Ultrafine Mill is widely used in making fine powder or micro powder, a new kind of machine for producing ultrafine powder. It is mainly used for grinding the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.
Ultrafine mill Features: 1. Reliable
2. High capacity and low cost
3. Easy adjustment of product fineness
4. Clean, environmental protection The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollerwhich are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small sizes ones and they are sent to storage bin by elevator. The electromagnetic vibrating feeder will send them to the middle of first dial evenly. The materials will be driven to the edge of dial by centrifugal force, and fall down into the ring and crushed, and then grinded by roller. The materials will fall down into the second and third ring, crushed and grinded. The high pressure-centrifugal blower will inhale air from the outside and blow the materials, which are grinded in the third ring, to powder classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground while the fineness will mix with the air and go into the cyclone and be discharged the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler. http://www.mill.com.pk
Ultrafine mill to produce super thin powder for Pakistan customers
