subject: How to Solve This Windows BlueScreen Problem? [print this page] Blue Screen of Death (Blue Screen of Doom or Windows stop error) is a term used when a PC shows an error screen, and based on the term used the screen that appears is usually blue with a or more error messages or code. This is commonly used to run the Microsoft Windows operating systems. This means that there is a fatal system error has occurred. As to date, there are several types of Windows operating system, the cause of having a blue screen usually varies for each type. For Windows NT for example, Windows stop error usually happens when there is a hardware malfunction, or when the device drivers are not installed properly or are defective.
BSOD on Windows 9x results of bugs in the kernel of the system or when there are DLLs that do not match. Very often, simple errors such as inadequate power supply, faulty memory, the hardware is collapsing because they operate beyond their limit, or when some parts of your computer to overheat. For the previous version of Windows Vista, red screen appears instead of blue and the OS / 2 black screen of death signals the failure of the system. And the first operating system including Windows, Windows 3.1 suffered from this screen to stop.
So how can solve this problem? For not so serious errors, restart the computer solves the problem. As a result, some data may be lost, especially when most of these errors are unknown. When this problem occurs, usually there are error codes usually contain certain technical values in brackets, which allow computer technicians and software engineers to solve the problem or at least locate where the problem started. When a BSOD error is caused by a boot loader, what happens when the processor is unable to enter the boot partition file system due to damaged or inadequate storage controllers can be repaired by booting from CD Microsoft Windows.
If the error is not solved simply by restarting, it might be better to find out where the problem originated, as a first step. When you turn your PC and there is a BSOD, even when the system is in safe mode, more often than not is a hardware concern. If you just installed a new hardware, try to remove it and see if the problem disappears. If you have not installed anything, try to detect other problems that could have happened. If not a hardware problem, start the PC in safe mode and run a virus scan or spy ware scan. If a virus or a problem after scanning, assist them and restart your computer in normal mode. If there is no virus, restart in safe mode again and use the System Restore utility. If still nothing works and you were able to get the error code and error message, the search for methods solving online problems. For those who are experts in technology and can be solved by themselves, can use registry cleaners that are available. If all else fails, its never too late to ask for technical assistance.
