subject: How To Prevent The Battery Memory Effect. [print this page] Currently two types of lithium batteries for mobile phones, lithium ion and lithium polymer. Two kinds of cathode materials are the same, the general
Are lithium cobalt oxide (lithium iron phosphate ternary materials and goods in the current cell phone battery is not kind), the main difference is that
Lithium-ion battery electrolyte is lithium hexafluorophosphate, lithium polymer battery electrolyte is a solid polymer. Basic polymer battery
Sony Ericsson batteries on both Tezhi. In general, the polymer battery discharge more uniform, better security, but the cost of more than
Higher.
Note two rechargeable lithium batteries is basically the same. Then I focus on the point of the safety features of lithium batteries. As the lithium
The battery itself does not overcharge protection, that is very easy to overcharge and cause an explosion, so all will be in lithium battery maker
Installation of an electrical circuit within the control chip, auto power-off immediately after filling. The NiMH battery on the contrary, their overcharge
Little impact as long as the temperature at safe temperatures about basic without incident. The safety of lithium temperature of 180 degrees
Over the temperature very easily explode.
Then buy a new phone, how the battery charge is better? Because any piece of lithium batteries must be done before leaving the factory safety
All testing, the process also equivalent to activate, so you can ensure that the lithium-ion cathode material can be freely and
Without lattice collapse. So the hands of ordinary consumers to the battery, are strictly tested activation step, do not worry
Mind active.
Circulated on the Internet now charge 12 hours before the third statement of origin, before the first cell phone battery nickel metal hydride batteries,
Such as Nokia 3310, Ni-MH battery factory without activation, and the battery itself has memory effect, so in order to make electricity
Performance of the best, often requires the user to use the most when the first charge to full, then the battery is completely put End (voltage from 1.
2v into 1.0v), it can prevent the memory effect. If you start charging time is shorter if the battery is not fully excited Laptop battery
