subject: ThinkPad Laptop Battery Maintenance Function [print this page] For ThinkPad laptops, the battery has a built-Power Manager management software, users can use the software maintenance of the battery, is to run the software, in the main interface point "BatteryMaintenance" button, and then "charging valve", select "Custom "At this point you can set when the battery charge and discharge, such as do not want trouble and remove the battery, you can" start charging less than the following value "is set to 10%, so even if the AC is connected, it will not charge battery.
In addition, users can also "Battery Information" window, check thebattery's health status, voltage, temperature, retention capacity, remaining time and number of charge cycles and other information to the user a reasonable routine mainter.
Many laptop battery life claimed capacity of up to 3 hours, but use had been only less than 2 hours endurance capacity, which may not be reasonable maintenance of battery, for which many laptop built-inbattery maintenance features to the thinkpad laptop, for example, user management interface in the VAIO Control Center is running "batterymaintenance functions" icon, then click on "Enable battery maintenance functions" options, and then need to set the battery maintenance level, for example, many users use the power adapter, it does not want to battery down and then once the thinkpad laptop battery is less than 100% (eg 99%), access will be immediately after the AC adapter to charge the battery, then select "battery maintenance functions", the battery needs to reduce to 80% charge only the beginning , and select the "superbattery maintenance functions", battery power is lower than 50% will begin charging.
