subject: Inexpensive Way To Repair Water Leaks, Slab Leaks And Copper Pinhole Leaks. [print this page] Water is the basic necessity of all living beings. Everyone nowadays needs to have water in their homes, offices and at all public places as well. But supply of water fails many a times due to leakage or pipes breakdown etc. Non revenue water is water that has been produced and is lost before it reaches the customer. Losses can be real losses through leaks, sometimes also referred to as physical losses or apparent losses for example through theft or metering inaccuracies. Everyone now want to have solution for these break downs.
Epipe, an ace duraflo product is the best solution to get rid of water leakage problems. ePIPE provides a cost effective solution to all the problems. Corrosion causes lead and copper contaminants to leach into your drinking water. Pinhole Leaks, Failing Copper in your pipes can cause major damage such as mold and water damage to your floor, ceiling or walls. Many people attribute brown water to the water source, when in fact the water entering their home is clean. Rust in their pipes is contaminating their water. Poor or lower flow than normal is also a teltale sign that there may be a problem in your piping system.
ePIPE protected lead pipes provide protection against lead from leaching into your drinking water. Starting in 2013, EU and UK standards for lead found in drinking water will follow World Health Guidelines of 10ug/l (10 PPB). Lead pipes protected with ePIPE linings will reduce lead to safe drinking water standards. The patented process seals pinhole leaks in place, saving water and damages resulting from leaking pipes. ePIPE is installed inside existing pipes, minimal disruption is required. Often, no digging is required to install ePIPE. Pipes are restored right inside your walls, in-place. Result, minimal damage or intrusion into your building structure. Corrosion build up inside a pipe can restrict water flow. ePIPE protected pipes are cleaned of corrosion and then lined. Result improved water flow, cleaner water. ePIPE can be installed in a matter of hours. For over a decade ePIPE has been chosen by 1000s of property owners, in the US, Canada and Europe.
Process of installing ePIPE is really easy. Air hoses are connected to the piping system. The isolated system is then dried with preheated, filtered air. The dried pipes are cleaned using an air and sand mixture that sandblasts the inside surface of the pipes. The cleaning process prepares the internal pipe surface for proper bonding of the epoxy. The final stage of the ePIPE process is the application of the epoxy lining to the system. Once the coating is cured the pipes are reassembled, flushed and pressure tested. The finished product provides a new pipe within a pipe protecting your water supply from leaching lead and leaks.
