subject: How to Install Replacement Windows [print this page] Over time, there are improvements that will need to be made on any home. New windows are a little adjustment that can make a big difference in changing the look of a room. If someone does not know how to install replacement windows, they could easily learn even with very little home improvement experience.
Before doing anything with the old windows, it is important to measure the windows carefully. For width, the window should be measured at the top, middle and bottom. It should then be measured on the right side, left side and middle for height. This is a very important step because the new windows may not be returnable if it turns out that they do not fit in the space.
After measuring carefully, it is time to remove the old windows. First, remove the inside trim, moldings and stops and save them for later use with the new windows. Next, remove the cords, weights and parting stops so that the top and bottom sash can be easily removed. If there are aluminum tracks in the window, be sure to remove those as well.
Once the old window is removed, the space must be prepared before the new window can be properly installed. It is first important to fill all of the empty weight spaces with fiberglass insulation. Then, use a generous amount of caulk on the inside and outside edges of the stool as well as on the outside of the blind stops.
After the space has been properly prepared, the handyman is ready to install the new window. The first step is to carefully fit the new window into the opening. Then locate the screw holes and screw the window into the frame opening. Finally, install insulation around the window while being sure not to use too much around the top and bottom since that could cause the window to bow.
Learning how to install replacement windows may seem daunting, but it is actually quite simple if someone takes their times and follows directions. Doing this type of project independently can save money on a contractor and can even be a fun way to get involved with home improvement. Just be sure to measure carefully before embarking on the project and to prepare the space properly before installing the new window. This attention to detail will make the project go smoothly and result in beautiful new windows.
