subject: Which Air Conditioning Unit Is Best For Your Specific Situation? Assess Your Options [print this page] For most home and all commercial air-con installation - it isn't just placing conditioner acceptable surface, but also quite complex process mounting blocks, connecting pipes and electric wiring. Completing the installation of conditioning commissioning and test running the conditioner. After installing air-con should be entirely prepared to be used.
To install the conditioner requires specialized equipment and expertise. Therefore requests the installation of conditioning professional installation teams, preferably from the company where you bought the conditioner. Save for installing conditioner can not in any case - better buy a cheaper model, with a smaller number of additional functions. Note: If air conditioning is not installed properly or poorly, it's good work he will not.
Good vendor is engaged not only selling, but also the installation and commissioning of air conditioners, air conditioning, ventilation and heating. This company pays great attention to the quality of preparation and assembly teams. Installers must be certified before each new season.
How to install different types of conditioners: 1. Monoblocks - no need to install. Just put in the right place and turn.
2. Window conditioners - they install special complexity does not represent, but we suggest you contact those who have already installed window air conditioners before.
3. Wall-mounted conditioners - They are mounting calls for specific skills and knowledge of technology. When you install a professional service and lifetime of air conditioner will be more, and the external unit operates quieter, and wall space will not be damaged. "Jobber" can set the air conditioner so that the condensate will be poured upon the heads of passers-by, or cracked wall and you will have to re-do repairs.
4. Cassette, floor / ceiling and channel air conditioners - their installation can be done only to execs. Are the Semi-conditioning is pricey, their installation is complicated and is available only to groups of talented executives.
Standard installation: Installing the indoor unit air conditioner in a standard setup wall air conditioner outdoor unit it is placed directly under the window of the room, is located in the inner block. The upper edge of the outdoor unit is not above the sill. The indoor unit is installed on the wall adjacent to the window. The distance between the internal and external air conditioner unit (length of freon route) does not exceed five meters. To condensate easily removed from the indoor unit, the line is carried out with a slope of 3-5 degrees (towards the outside down). Indoor unit air conditioner must be installed exactly, otherwise it may leak water. Pipeline, which will circulate freon, electrical power cable and the drainage tube (to remove the condensation water) are constructed as follows:
1. Inside all communications are in a white plastic box. 2. Opening in the outer wall thru which the communication is also closed plastic passage. 3. The thickness of the outer wall doesn't surpass sixty inches. 4. Outside of the building pipes and wires run along the wall, and they aren't attached to the wall and guarded by a basket. 5. Drainage pipe from the inner block is extracted by ten - twenty cm thru the closest exterior wall. 6. Electrical power wire is laid in decorative boxes white.
