subject: Here's A Technique For That Noisy Plumbing System In Your Home [print this page] If you've ever been treated to the discordant symphony of loud pipes you know that there's a lot going in there that you do not understand. All the issues that may cause your plumbing to sound off in protest can be worked out simply though if you understand which pipes are making the noise. When you've identified the source of racket, fixing the difficulty is mostly as straightforward as making an adjustment or adding a straightforward cushion between the pipe and the strapping holding it in effect.
One common problem is a loud banging in the pipes. This is caused by rapid changing in the water temperature in the pipes and, at some point the pipe is looser than it needs to be. Usually pipes are anchored about every ten feet, on vertical runs and every 8 feet on horizontal runs with straps.
The fast answer to this problem is to add additional straps and put a cushion between the strap and the pipe. Infrequently it is simple to see where the additional space is, often not. The simplest way is to add the straps each 5 feet, both vertical and horizontal runs.
High pitched squeaking sounds coming from you pipes is one of the most annoying sounds, especially if you have pets. These sounds will greatly disturb your animals and possibly even cause damage over time to them.
This is and easy problem to solve however as only hot water pipes will squeak, making the search for the culprit pipe much easier. Your pipes will squeak when the pipe expands and contracts in the strapping due to temperature differences. Again, simply place a cushion, or cushions around the pipe and your problem is solved.
Eventually the worst problem is continual banging that comes from air pockets in the pipes. When you turn on any tap or appliance, like a dishwasher or washer the water will appear to hammer on the pipes. The fastest way to resolve that difficulty is to turn your water off at the primary shut off valve, open all the taps in the house, including outside taps, and utterly drain you pipes. Once the water stops flowing, turn the primary back on and re-fill the pipes which should correct the issue.
Solving your simple plumbing problems without the assistance of a high priced plumber is usually easy once you understand what the problem is. There are many different resources online that will guide you through the process of making yourself plumbing independent of all but the most serious problems.